Unit of competency Outline

Date retreived
22/07/2026 5:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install tunnelling constructions services

Install tunnelling constructions services

Unit of competency
National Code
RIICTC301D
State Code
WH175
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
68
Description
This unit describes a participant’s skills and knowledge required to install tunnelling constructions services in Civil Construction.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to install tunnelling construction services
  • 1.1 Access, interpret and apply tunnelling construction services documentation and ensure the work activity is compliant
  • 1.2 Obtain, interpret, clarify and confirm work instructions before proceeding
  • 1.3 Identify, obtain and implement the traffic signage requirements
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Select and check for faults plant, tools and equipment to carry out tasks
  • 1.6 Identify, address and report hazards, risks and environmental issues
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Install ducting for air and ventilation
  • 2.1 Install pipeline for compressed air to design location and connect to compressor
  • 2.2 Install pipeline for air supply to location and specifications
  • 2.3 Install ventilation ducting to location and specifications
3. Install pipelines for construction services
  • 3.1 Install pipelines for drainage and connect to pumping system
  • 3.2 Install pipelines for water supply
4. Install road/rail access
  • 4.1 Lay, spread and compact material to provide surface for vehicular access where required
  • 4.2 Identify and confirm rail track construction from tunnel drawings and specifications
  • 4.3 Lay and install rail track to specifications
  • 4.4 Install warning and directional signage to designed locations
5. Maintain services
  • 5.1 Maintain service ducting and pipelines to operational conditions
  • 5.2 Maintain access facilities to safe working operational requirements
  • 5.3 Inspect and maintain rail track
6. Clean up
  • 6.1 Clear work area and dispose or recycle materials
  • 6.2 Plant, tools and equipment are cleaned, checked, maintained and stored
  • 6.3 Carry out housekeeping activities
No information
No information
Replaces
State Code National Code Title Type
WB511 RIICTC301A Install tunnelling constructions services Unit of competency
Replaced By
State Code National Code Title Type
OCY37 RIICTC301E Install tunnelling constructions services Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification