Unit of competency Outline

Date retreived
22/07/2026 5:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set and edit computer controlled machines/processes

Set and edit computer controlled machines/processes

Unit of competency
National Code
MEM07016C
State Code
W5361
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
16/03/2012
View on TGA
State Implementation and Classification
Approved Date
18/06/2009
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
18/06/2009
Nominal Hours
36
Description
This unit covers setting work holding fixtures/devices/tools, setting tooling offsets, trialling the program, instructing the operator and replacing worn or damaged tooling.
Notes
Elements and Performance Criteria
1. Identify job requirements
  • 1.1. Instructions/plans are understood and correctly followed.
2. Set work holding fixtures/devices/tools
  • 2.1. Correct ancillary devices are selected and attached to machine using standard operating procedures.
  • 2.2. Machine is prepared to accept work holding devices.
  • 2.3. Work holding fixtures/devices/tools are set to zero or a datum using appropriate setting devices.
3. Set tooling offsets
  • 3.1. Tooling offsets are measured and recorded in machine controller.
4. Trial program
  • 4.1. Machine is operated to produce first-off samples, observing all safety procedures.
  • 4.2. First-off samples are checked for compliance with specifications.
  • 4.3. Program editing to change speeds, feed and operational sequence requirements is undertaken as required to ensure job conforms to specification.
5. Instruct machine operator
  • 5.1. Operator is instructed if necessary ensuring that all safety procedures and devices are in place.
6. Replace worn or damaged tooling
  • 6.1. Where appropriate, tools are replaced, tool offsets are adjusted or other corrective action is taken using standard operating procedures.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to set and edit computer controlled machines/processes. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both. Where assessment occurs off the job, i.e. the candidate is not in productive work, an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with setting and editing computer controlled machines/processes or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning should not require language, literacy and numeracy skills beyond those required in this unit. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
State Code National Code Title Type
OAW38 MEM07016 Set and edit computer controlled machines and processes Unit of competency