Unit of competency Outline

Date retreived
22/07/2026 1:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Butt weld polyethylene plastic pipelines

Butt weld polyethylene plastic pipelines

Unit of competency
National Code
PMBWELD301
State Code
BAH84
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/08/2016
Nominal Hours
20
Description
This unit of competency covers the skills and knowledge required to butt weld polyethylene (PE) plastic pipelines. It applies to welding undertaken in the field and in factory conditions. Pipelines may be for transmission of gas or liquids.This unit of competency applies to experienced operators who are required to calculate appropriate welding parameters to be used, set up equipment, perform butt weld, assess joints against specifications and solve problems within area of responsibility.This unit of competency applies to an experienced operator demonstrating theoretical and technical knowledge and well developed skills in situations that require some discretion and judgement. The operator may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify materials as being compatible for welding
  • 1.1 Identify materials as polyethylene (PE) from specifications and work site instructions
  • 1.2 Identify PE materials and pipes supplied as being compatible for welding from specifications
2 Calculate appropriate pipe welding parameters
  • 2.1 Identify welding machine type and operating data
  • 2.2 Identify pipe materials and dimensions
  • 2.3 Perform welding parameter calculations for individual welding machines and pipe details
  • 2.4 Prepare field operational sheets as per enterprise requirements
3 Maintain and calibrate welding equipment
  • 3.1 Set up welding equipment and work area
  • 3.2 Ensure safety equipment is available and operational
  • 3.3 Identify non-conformance, report and rectify
  • 3.4 Check operation and calibrate where required, heating, trimming, and pressure systems
4 Perform welding to required standard
  • 4.1 Assemble pipeline components in welding machine
  • 4.2 Clean, align and trim pipe ends
  • 4.3 Perform heating, welding, and cooling phases using calculated welding parameters
  • 4.4 Monitor and record achieved weld parameters for each joint according to enterprise requirements
  • 4.5 Clean up equipment when completed according to enterprise procedures
  • 4.6 Clean up work site, dispose of scrap materials according to enterprise procedures
  • 4.7 Use personal protective equipment (PPE) according to enterprise requirements
5 Assess quality of completed joints
  • 5.1 Identify quality requirements for joints
  • 5.2 Assess joints against specification requirements, and report results
  • 5.3 Identify and report non-conformances according to enterprise requirements
No information
No information
Replaces
State Code National Code Title Type
W7710 PMBWELD301B Butt weld polyethylene plastic pipelines Unit of competency
Replaced By
State Code National Code Title Type
ODB30 PMBWELD301E Join polyethylene plastic pipelines using butt welding Unit of competency