Unit of competency Outline

Date retreived
22/07/2026 11:35 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply quick changeover procedures

Apply quick changeover procedures

Unit of competency
National Code
ICPSUP357
State Code
AUN43
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
080307 - Organisation Management
Original Release Date
16/09/2015
Nominal Hours
20
Description
This unit describes the skills and knowledge required to carry out quick operational changeovers and recommend improvements within the scope and authority of the job. It applies to individuals who perform a range of defined tasks relating to the printing and print finishing industry, who may also provide some leadership and guidance to others with some limited responsibility for the output of others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for changeover
  • 1.1 Timing of changeover is determined according to production schedule
  • 1.2 All required tools/parts/materials are obtained for changeover
  • 1.3 Process and tools/parts/materials are organised ready for changeover
  • 1.4 Liaison with relevant people is conducted for quick changeover
2. Make quick changeover
  • 2.1 Quick changeover is planned according to quick changeover principles
  • 2.2 Changeover is completed according to enterprise procedures
  • 2.3 Output is checked to meet specifications
  • 2.4 Any steps which cause a problem are noted and changes recommended to problematic steps
3. Improve work health and safety (WHS)
  • 3.1 Hazards in all steps/actions are identified
  • 3.2 Risks from each hazard are determined
  • 3.3 Actions which may be performed in a more ergonomic manner are identified
  • 3.4 Changes are recommended to improve WHS
No information
No information
Replaces
State Code National Code Title Type
D3270 ICPSU357C Apply quick changeover procedures Unit of competency
Replaced By
State Code National Code Title Type
OBQ83 ICPSUP3570 Apply quick changeover procedures Unit of competency