Unit of competency Outline

Date retreived
22/07/2026 4:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply quick changeover procedures

Apply quick changeover procedures

Unit of competency
National Code
ICPSUP3570
State Code
OBQ83
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
080307 - Organisation Management
Original Release Date
20/08/2020
Nominal Hours
20
Description
This unit describes the skills and knowledge required to carry out quick operational changeovers and recommend improvements within the scope and authority of the job. It applies to individuals who perform a range of defined tasks relating to the printing and print finishing industry, who may also provide some leadership and guidance to others with some limited responsibility for the output of others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for quick changeover
  • 1.1 Identify enterprise and personnel requirements for quick changeover
  • 1.2 Determine timing of changeover according to enterprise production schedule
  • 1.3 Identify and obtain all required equipment
  • 1.4 Organise process and required equipment
  • 1.5 Liaise with required personnel
2. Conduct quick changeover
  • 2.1 Plan quick changeover according to identified enterprise procedures
  • 2.2 Complete changeover according to enterprise procedures
  • 2.3 Check output meets enterprise requirements
  • 2.4 Check and adjust equipment for future runs
  • 2.5 Identify areas for improvement and recommend changes
3. Apply work health and safety (WHS) principle to changeover
  • 3.1 Identify hazards in the process
  • 3.2 Determine risks from each hazard
  • 3.3 Identify actions which may be performed in a more ergonomic manner
  • 3.4 Recommend changes to improve work health and safety (WHS)
No information
No information
Replaces
State Code National Code Title Type
AUN43 ICPSUP357 Apply quick changeover procedures Unit of competency