Unit of competency Outline

Date retreived
21/07/2026 11:29 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply quality systems to work

Apply quality systems to work

Unit of competency
National Code
UEPOPS202
State Code
OAH44
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
View on TGA
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
080317 - Quality Management
Original Release Date
15/05/2019
Nominal Hours
18
Description
This unit involves the skills and knowledge required to apply a quality assurance system to work.Quality control is a process to ensure that significant variations in quality are kept to a minimum. Quality control in a power generation facility will focus on a set of procedures intended to ensure that personnel, plant and equipment operate smoothly and efficiently. Competency in this unit requires the ability to plan and prepare quality procedures, conduct quality system practices and initiate changes to quality systems. Individuals will, in general, work as an operator in a power generation facility. No licensing, legislative or certification requirements apply from this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare to work withquality systems
  • 1.1 Quality procedures are identified from quality system and Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, in accordance with workplace procedures
  • 1.2 Performance objectives are identified, in accordance with workplace procedures and Quality Management System (QMS)
  • 1.3 Work plan is structured, in accordance with workplace procedures and site requirements, to ensure quality standards are achieved
2 Conduct quality systempractices
  • 2.1 Quality assurance processes and procedures are implemented, in accordance with workplace procedures and manufacturers' recommendations
  • 2.2 Work is monitored against quality standards and sustainable energy principles, and are clarified with appropriate personnel, in accordance with workplace procedures
  • 2.3 Allocated work tasks are completed, in accordance with workplace procedures and quality assurance requirements
3 Initiate changes to quality systems
  • 3.1 Improvements to quality assurance procedures are identified by analysis of system outcomes, in accordance with workplace procedures and quality assurance requirements
  • 3.2 Extent of proposed changes to quality procedures are investigated, in accordance with workplace procedures and quality assurance
  • 3.3 Proposed improvements are negotiated and confirmed with appropriate personnel, in accordance with workplace procedures and quality assurance requirements
No information
No information
Replaces
State Code National Code Title Type
WE302 UEPOPS202B Apply quality systems to work Unit of competency
Replaced By
State Code National Code Title Type
ODZ18 UEPOPS003 Apply quality systems to work Unit of competency