Qualification Outline
22/07/2026 2:26 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Diploma of ESI Generation Maintenance - Electrical Electronic
Diploma of ESI Generation Maintenance - Electrical Electronic
UEP50418
BEB0
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 2.00 | 21/04/2021 | Current | Approved |
| 1.00 | 31/10/2018 | Replaced | Approved |
Description
Participants gaining this qualification will be able to manufacture, fit, assemble, erect, operate, test, diagnose faults, alter and repair electrical and electronic equipment including instrumentation systems. It does not include installation of any electrical wiring systems within an electrical installation as prescribed in current industry standards.
Functions can include maintenance planning and scheduling, as well as electrical wiring work if it is associated with assembling, maintaining, terminating or altering the wiring between electrical components within power generating plant or machinery. It also includes the supervision of others and the coordination of work activities.
Electrical equipment means any appliance, article, accessory, wire, fitting, cable, conduit or apparatus that generates, uses, conveys or controls, or that is intended to generate, use, convey or control electricity above extra low voltage.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Schedule
Packaging Rules
A total 1600 weighting points comprising 1010 core weighting points, plus 590 general elective weighting points from the general elective units listed below.- Choose a minimum of 870 weighting point elective units from the list below; up to 270 weighting points can be taken from Group A. A maximum 180 weighting points can be selected from Group B. A maximum 240 weighting points can be selected from Group C. A minimum of 180 to a maximum of 540 weighting points may be taken from Group D. You may select all your elective units from this group.
- Up to 270 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided that selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in UEP CVIG, if not listed weighting points will be ten (10) points unless directed from the ESI Generation Industry Reference Committee (IRC). The general elective units must contribute to the vocational outcomes of the qualification. The general elective units must contribute to the vocational outcomes of the qualification.
Where imported units are selected, care must be taken to ensure that all prerequisite units specified are complied with.
1. Core Units
All twenty five (25) units, totaling 1010 points, must be completed.
2. Group A Elective Units
A maximum of 270 weighting points may be chosen from Group A.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AUK09 | BSBINN502 | Build and sustain an innovative work environment | 50 | Unit of competency |
| AUL89 | BSBLED501 | Develop a workplace learning environment | 50 | Unit of competency |
| AUM01 | BSBWHS501 | Ensure a safe workplace | 50 | Unit of competency |
| AUL24 | BSBMGT516 | Facilitate continuous improvement | 50 | Unit of competency |
| AUH47 | BSBWOR502 | Lead and manage team effectiveness | 50 | Unit of competency |
| AUJ29 | BSBINM501 | Manage an information or knowledge management system | 40 | Unit of competency |
| AUJ03 | BSBMGT517 | Manage operational plan | 50 | Unit of competency |
| AUI44 | BSBMGT502 | Manage people performance | 50 | Unit of competency |
| AUK69 | BSBWOR501 | Manage personal work priorities and professional development | 50 | Unit of competency |
| AUM47 | BSBCUS501 | Manage quality customer service | 50 | Unit of competency |
3. Group B Elective Units
A maximum of 180 weighting points may be chosen from Group B.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OAH20 | UEPOPS301 | Conduct single energy source isolation procedures for permit to work | 36 | Unit of competency |
| OAI02 | UEPMNT357 | Diagnose and repair faults in instrumentation equipment | Unit of competency | |
| OAI04 | UEPMNT355 | Install complex electronic instrumentation equipment | Unit of competency | |
| OAI09 | UEPMNT347 | Maintain complex electrical equipment | Unit of competency | |
| OAI08 | UEPMNT348 | Maintain electrical electronic equipment | Unit of competency | |
| OAI11 | UEPMNT346 | Maintain electrical equipment | Unit of competency | |
| OAI03 | UEPMNT356 | Maintain instrumentation equipment | Unit of competency | |
| OAH97 | UEPMNT366 | Maintain power plant inverter systems | Unit of competency | |
| OAI07 | UEPMNT350 | Modify electrical equipment | Unit of competency | |
| OAI01 | UEPMNT358 | Modify instrumentation equipment | Unit of competency | |
| OAI06 | UEPMNT351 | Test and commission electrical equipment | Unit of competency | |
| OAI00 | UEPMNT359 | Test and commission instrumentation equipment | Unit of competency |
4. Group C Elective Units
A maximum of 240 weighting points may be chosen from Group C.
Please refer to the packaging rules for the full details of available options.
5. Group D Elective Units
A minimum of 180 to a maximum of 540 weighting points may be chosen.
Please refer to TGA for a full list of unit weighting points.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OAG12 | UEPOPS508 | Manage commissioning and decommissioning | 72 | Unit of competency |
| OAG11 | UEPOPS511 | Tune process plant and equipment | 54 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| J262 | UEP50412 | Diploma of ESI Generation Maintenance - Electrical Electronic | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BHQ1 | UEP50422 | Diploma of ESI Generation Maintenance - Electrical Electronic | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships