Unit of competency Outline

Date retreived
23/07/2026 5:52 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply computation when using equipment, materials and concepts in an electrotechnology environment

Apply computation when using equipment, materials and concepts in an electrotechnology environment

Unit of competency
National Code
UEENEEE045B
State Code
W7845
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
29/07/2011
View on TGA
State Implementation and Classification
Approved Date
04/06/2008
Field of Education
120505 - Work Practices Programmes
Original Release Date
04/06/2008
Nominal Hours
54
Description
1)1.1) DescriptorThis unit covers undertaking computations to produce appropriate results using a range of equipment, materials and concepts in carrying out Electrotechnology work activities, whilst ensuring work is completed in an agreed time, to a quality standard and with a minimum of waste.
Notes
Elements and Performance Criteria
1 Prepare to apply computations when using equipment, materials and concepts.
  • 1.1 Instructions for the preparation to apply computations when using equipment, materials or concepts are communicated and confirmed to ensure clear understanding.
  • 1.2 OHS policies and procedures are communicated and confirmed to ensure they are understood as they apply to the carrying out of the work.
  • 1.3 Tools, equipment and personnel protective equipment necessary for the work are identified, scheduled and checked to ensure they work correctly as intended and are safe to use in accordance with established procedures.
  • 1.4 Appropriate personnel are consulted to ensure computations when using equipment, materials or concepts is coordinated effectively with others involved.
  • 1.5 Resources and materials needed to do the work are confirmed, scheduled and obtained in accordance with established procedures.
  • 1.6 Schedule of computations to be applied when using equipment, materials or concepts, including practices for working safely, are confirmed in accordance with instructions and requirements.
2 Carry out computations when using equipment, materials and concepts.
  • 2.1 OHS policies and procedures and safe work practices are followed to eliminate or minimise incidents.
  • 2.2 Schedule of computations is followed to ensure the use equipment, materials or concepts is completed in an agreed time, to a quality standard and with a minimum of waste.
  • 2.3 Further instructions are sought from appropriate personnel in the event of unplanned happenings or conditions.
  • 2.4 Ongoing checks of quality of the computations are undertaken in accordance with instructions and requirements.
3 Confirm results of computations when using equipment, materials and concepts.
  • 3.1 Confirm results of computations when using equipment, materials and concepts.
  • 3.2 Appropriate personnel are notified of completion of the computations.
  • 3.3 Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures.
  • 3.4 Work area is cleaned up and made safe and sustainable energy practices are followed.
  • 3.5 Appropriate records are updated in accordance with instructions and established procedures.
No information
No information
Replaced By
State Code National Code Title Type
WC439 UEENEEE145A Apply computation when using equipment/materials/concepts in an energy sector environment Unit of competency
State Code National Code Title Type
5671 51908 Certificate I in Electrotechnology Pre-Apprentice Electrical Accredited course