Unit of competency Outline

Date retreived
22/07/2026 9:14 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce manual and computer-aided production drawings

Produce manual and computer-aided production drawings

Unit of competency
National Code
LMFFM3011B
State Code
W8618
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
11/05/2009
View on TGA
State Implementation and Classification
Approved Date
03/11/2009
Field of Education
030101 - Manufacturing Engineering
Original Release Date
03/11/2009
Nominal Hours
52
Description
This unit covers the competency to produce production drawings using both manual and computer-aided methods
Notes
Elements and Performance Criteria
1. Identify object to be drawn
  • 1.1. The purposes and any operational characteristics of object to be drawn are identified
  • 1.2. Production materials and method are identified
2. Establish drawing criteria and limitations
  • 2.1. Type of drawing to be completed is identified
  • 2.2. Drawing requirements are established and documented identifying dimensions, angles, shapes and finished sizes
  • 2.3. Drawing conventions and specifications to be noted on the drawing are identified
  • 2.4. Appropriate medium for drawings is identified and selected
3. Quantify and draft initial drawing
  • 3.1. Dimensions are plotted from criteria and documented specifications
  • 3.2. Dimensional points are connected to match appropriate drawing views
  • 3.3. Any production notes or special requirements are noted
  • 3.4. Drawing conventions and specifications are noted on the documentation
4. Complete drawing
  • 4.1. Angles, shapes and dimensions are checked against specifications and sample
  • 4.2. Adjustments are made to the drawing within scope of authority
  • 4.3. Drawing is checked for compliance with workplace documentation requirements
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Scope of drawing
Drawing is to be limited to that used for manufacture/ production purposes and is not to encompass original design concepts
Drawing is to be completed using both manual and computer-aided design techniques and processes
Unit scope
Drawings are to be in metric scale and cover all dimensions of the furniture and furnishings
Calculations
Calculations are to be performed both manually and with the aid of a calculator
Unit context
Workplace health and safety requirements may include OH&S legislation, building codes, material safety management systems, hazardous substances and dangerous goods codes and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Personal protection equipment
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices
Information and procedures
Work procedures relating to production drawing
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturers' specifications and operational procedures








EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical Aspects of Evidence
Identify the factors and criteria relevant to the drawings
Apply safety requirements throughout the work sequence, including the use of personal protective clothing and equipment
Communicate effectively to enable accurate drawings
Prepare production drawings of furniture/furnishings:
covering a scope of at least three products
applying both manual and computer-aided techniques and processes

Resource Implications
Information on the subjects for drawing, suitable work area appropriate to the activity, computer-aided drawing systems, measuring, calculating and recording devices.

Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency.

Context of Assessment
Assessment may occur on the job or in a simulated workplace facility with relevant equipment, simulated work instructions and deadlines.


Replaces
State Code National Code Title Type
W0292 LMFFM3011A Produce manual and computer-aided production drawings Unit of competency
Replaced By
State Code National Code Title Type
WI430 MSFFM3009 Produce manual and computer-aided production drawings Unit of competency