Unit of competency Outline
Date retreived
22/07/2026 2:00 PM AWST
22/07/2026 2:00 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Cut and shape canvas or sail materials
Cut and shape canvas or sail materials
Unit of competency
National Code
LMTTF2011A
LMTTF2011A
State Code
W7470
W7470
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
24/10/2014
Field of Education
030105 - Textile Making
Original Release Date
24/10/2014
Nominal Hours
40
Description
This unit covers the skills and knowledge required to manually cut and shape fibrous materials used in canvas product and sail construction.
Notes
Elements and Performance Criteria
1 Plan work and prepare work area
- 1.1 Workplace procedures and instructions are read and interpreted
- 1.2 Work is performed in accordance with defined procedures and methods either individually or in a team environment
- 1.3 Work is performed in accordance with statutory requirements, workplace insurance requirements, OHS practices, manual handling procedures and relevant health regulations
- 1.4 Work is generally performed under direct supervision
2 Cut and shape material
- 2.1 Electric tools are connected to power and used safely
- 2.2 Shears, trimmers, rotary cutting devices and dies are used to cut materials and form complex shapes in material
- 2.3 Materials are safely manipulated on cutting table or floor
- 2.4 Product is separated from waste material
- 2.5 Knowledge of cutting and shaping processes are applied to perform required tasks
3 Remove product and dispose of waste materials
- 3.1 Finished panels are removed, folded with correct sequence of folds to suit sewing stage and stored neatly for further processing
- 3.2 Waste materials are removed and separated for recycling or reuse
- 3.3 Waste materials designated for reuse are sorted according to size and shape and returned to storage
- 3.4 Waste materials designated for recycling are safely and efficiently disposed of in accordance with workplace procedures
- 3.5 Waste materials unsuitable for recycling are disposed of in an environmentally acceptable manner
- 3.6 Assistance to move finished products and waste material is obtained if necessary
4 Inspection, quality, labelling and documentation
- 4.1 Completed work is informally inspected by operator to check that it appears to be of an acceptable standard
- 4.2 Completed panels are labelled or tagged with job number, client, or other identification and any necessary documentation completed in accordance with workplace procedures
5 Clean up and maintain cutting equipment and work area
- 5.1 Normal basic maintenance of cutting surface and cutting equipment is performed in accordance with workplace requirements and manufacturer specifications
- 5.2 Work area is cleaned
- 5.3 Supervisor is notified of any abnormal conditions requiring maintenance or repair
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Materials may include
fibres and yarns used in canvas and sail making
ropes
dacron, nylon and composite sail cloths
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Materials may include
fibres and yarns used in canvas and sail making
ropes
dacron, nylon and composite sail cloths
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
comply with all relevant safety requirements including safe use of cutting and shaping equipment and associated hand and power tools
interpret work orders
interpret equipment and materials specifications and instructions needed for the cutting and shaping process
prepare material to be cut and shaped and set up cutting equipment
perform cutting and shaping processes
perform basic operator maintenance of cutting equipment
perform normal operator maintenance of work area to enable work to be conducted safely and efficiently
document and communicate work related information including reporting of faults and other problems
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment, and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
comply with all relevant safety requirements including safe use of cutting and shaping equipment and associated hand and power tools
interpret work orders
interpret equipment and materials specifications and instructions needed for the cutting and shaping process
prepare material to be cut and shaped and set up cutting equipment
perform cutting and shaping processes
perform basic operator maintenance of cutting equipment
perform normal operator maintenance of work area to enable work to be conducted safely and efficiently
document and communicate work related information including reporting of faults and other problems
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment, and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| E0967 | LMTPRTF03AA | Cut and shape - 1 | Unit of competency |
| E1903 | LMTPRTF03BA | Cut and shape - 2 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAU58 | MSTTF2011 | Cut and shape canvas or sail materials | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W370 | LMT30407 | Certificate III in Textile Fabrication | Qualification |
| W356 | LMT20507 | Certificate II in Textile Fabrication | Qualification |
| W380 | LMT40107 | Certificate IV in Textile Technology and Production | Qualification |
| W392 | LMT50407 | Diploma of Textile Technology and Production Management | Qualification |