Qualification Outline
22/07/2026 4:54 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Textile Fabrication
Certificate III in Textile Fabrication
LMT30407
W370
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 2.00 | 27/06/2012 | Current | Approved |
Description
Job roles/employment outcomes
The Certificate III reflects vocational outcomes for those performing supervision roles, specialised technical tasks or multi-skilled roles within a production environment.
Application
This qualification is typically used to develop skill and knowledge in the application of specialised technical, operational and supervisory skills within textile fabrication enterprises.
Schedule
Packaging Rules
To be awarded the Certificate III in Textile Fabrication, competency must be achieved innineteen (19) units of competency.
- Nine (9) core units of competency
- Ten (10) elective units of competency as specified below.
Select ten (10) elective units as specified below.
- A minimum of two (2) units must be selected from Group A
- A minimum of two (2) units must be selected from Group B
- A minimum of two (2) units must be selected from Group C
- A maximum of two (2) units may be selected from Group E
- A maximum of three (3) units may be selected from Group F
- other Textile Fabrication units that are available at Certificates II (maximum 1 unit) and III (maximum 3 units)
- other TCF Training Package units that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit)
- units from other endorsed Training Packages and accredited courses that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 u
1. Core Units
All nine (9) core units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7304 | LMTGN2002B | Apply quality standards | 30 | Unit of competency |
| W7303 | LMTGN2001B | Follow defined OHS policies and procedures | 20 | Unit of competency |
| W7468 | LMTTF2009A | Identify and select canvas and sail materials | 40 | Unit of competency |
| W7465 | LMTTF2006A | Measure and scale geometric shapes | 50 | Unit of competency |
| W7314 | LMTGN3002B | Organise and plan own work to achieve planned outcomes | 30 | Unit of competency |
| D3655 | MSAENV272B | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| W7464 | LMTTF2005A | Translate information into measurements or diagrams | 50 | Unit of competency |
| W7476 | LMTTF2018A | Use canvas and sail production tools | 20 | Unit of competency |
| W7305 | LMTGN2003B | Work in the Textiles, Clothing and Footwear industry | 40 | Unit of competency |
2. Group A Elective Units
A minimum of two (2) units must be selected from Group A.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7482 | LMTTF3005A | Apply lofting skills to sail making | 60 | Unit of competency |
| W7483 | LMTTF3006A | Cut and join sail panels | 60 | Unit of competency |
| W7479 | LMTTF3002A | Gain customer acceptance of service proposal | 40 | Unit of competency |
| W7478 | LMTTF3001A | Identify customer requirements (on site) | 20 | Unit of competency |
| W7481 | LMTTF3004A | Perform advanced welding of plastic materials | 40 | Unit of competency |
| W7480 | LMTTF3003A | Produce patterns for 3D products | 40 | Unit of competency |
3. Group B Elective Units
The remainder must be selected from Groups A, B and C.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7482 | LMTTF3005A | Apply lofting skills to sail making | 60 | Unit of competency |
| W7313 | LMTGN3001B | Control production in a section of a textiles, clothing and footwear enterprise | 60 | Unit of competency |
| W7483 | LMTTF3006A | Cut and join sail panels | 60 | Unit of competency |
| W7315 | LMTGN3003B | Estimate and cost job | 50 | Unit of competency |
| W7479 | LMTTF3002A | Gain customer acceptance of service proposal | 40 | Unit of competency |
| W7478 | LMTTF3001A | Identify customer requirements (on site) | 20 | Unit of competency |
| W7386 | LMTLG3001A | Make a prototype | 60 | Unit of competency |
| W7481 | LMTTF3004A | Perform advanced welding of plastic materials | 40 | Unit of competency |
| W7316 | LMTGN3005B | Plan tasks to assist production operations | 80 | Unit of competency |
| W7480 | LMTTF3003A | Produce patterns for 3D products | 40 | Unit of competency |
4. Group C Elective Units
A minimum of two (2) units must be selected from Group C.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7463 | LMTTF2004A | Add reinforcements and attachments | 40 | Unit of competency |
| W7470 | LMTTF2011A | Cut and shape canvas or sail materials | 40 | Unit of competency |
| W7475 | LMTTF2017A | Cut, bend and shape metal | 60 | Unit of competency |
| W7461 | LMTTF2001A | Despatch products | 20 | Unit of competency |
| W7477 | LMTTF2019A | Inspect canvas or sail product | 40 | Unit of competency |
| W7474 | LMTTF2016A | Install products on and off site | 40 | Unit of competency |
| W7469 | LMTTF2010A | Lay out and mark out canvas or sail materials | 60 | Unit of competency |
| W7462 | LMTTF2003A | Package and handle products for despatch | 30 | Unit of competency |
| W7466 | LMTTF2007A | Produce patterns for 2D products | 20 | Unit of competency |
| W7471 | LMTTF2012A | Stitch by hand | 40 | Unit of competency |
| W7467 | LMTTF2008A | Use adhesives | 30 | Unit of competency |
| W7472 | LMTTF2013A | Waterproof canvas products | 20 | Unit of competency |
| W7473 | LMTTF2014A | Weld plastic materials | 40 | Unit of competency |
5. Group D Elective Units
A maximum of two (2) units may be selected from Group D.
Please refer to the packaging rules for the full details of available options.
6. Group E Elective Units
A maximum of two (2) units may be selected from Group E.
Please refer to the packaging rules for the full details of available options.
7. Group F Elective Units
A maximum of three (3) units may be selected from Group F:
- other Textile Fabrication units that are available at Certificates II (maximum 1 unit) and III (maximum 3 units)
- other TCF Training Package units that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit)
- units from other endorsed Training Packages and accredited courses that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit)
Please refer to the Training Package for the full details of available units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W287 | LMT30406 | Certificate III in Textile Fabrication | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BDG2 | MST30216 | Certificate III in Manufactured Textile Products | Qualification |
No information
Entry Requirements
Not applicable.
Traineeships and Apprenticeships