Unit of competency Outline

Date retreived
23/07/2026 6:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Solve basic problems in micro-hydro systems

Solve basic problems in micro-hydro systems

Unit of competency
National Code
UEERE0045
State Code
OCC57
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031399 - Electrical And Electronic Engineering And Technology, N.e.c.
Original Release Date
12/07/2021
Nominal Hours
18
Description
This unit involves the skills and knowledge required to solve basic problems in micro-hydro systems.It includes preparing to work on micro-hydro systems, solving problems in micro-hydro systems and completing work and documenting problem-solving activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Those holding an ‘Unrestricted Electrician’s Licence’ or equivalent issued in an Australian state or territory meet the prerequisite requirements of this unit.
Notes
Elements and Performance Criteria
1 Prepare to work on micro-hydro systems
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and procedures for relevant work area are identified and applied in accordance with workplace procedures
  • 1.2 Risk control measures are applied in accordance with workplace procedures prior to commencing work
  • 1.3 Nature of the apparatus problem is obtained from documentation or from relevant person/s to determine the scope of work
  • 1.4 Instructions for coordinating work with others is obtained from relevant person/s and applied
  • 1.5 Materials required for the work are identified and accessed in accordance with workplace procedures
  • 1.6 Tools, equipment and testing devices required for work are obtained and checked for correct operation and safety
2 Solve problems in micro-hydro systems
  • 2.1 Workplace risk control measures and procedures are applied
  • 2.2 Need to test or measure live electrical work is determined in accordance with WHS/OHS requirements and conducted in accordance with workplace procedures
  • 2.3 Circuits are isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.4 Micro-hydro problems are solved using measured and calculated values of apparatus operating parameters and in accordance with workplace procedures
  • 2.5 Problems are solved without damage to apparatus, circuits, the surrounding environment and services applying sustainable energy practices
3 Complete work and document problem-solving activities
  • 3.1 Workplace risk control measures and procedures are applied
  • 3.2 Worksite is cleaned and made safe in accordance with workplace procedures
  • 3.3 Justification for solutions used to solve micro-hydro problems is documented
  • 3.4 Work completion is documented and relevant person/s notified in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC695 UEENEEK124A Solve basic problems in micro hydro systems Unit of competency