Unit of competency Outline

Date retreived
22/07/2026 9:16 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform repairs and maintenance

Perform repairs and maintenance

Unit of competency
National Code
MSFOPS302
State Code
OFJ91
TGA Status
Current
DTWD Status
Pending
Current Release Number
1.00
Current Release Date
13/03/2026
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
Nominal Hours
Description
This unit describes the skills and knowledge required to assess, plan, and carry out repairs on existing installed items. It involves identifying faults, determining a course of action, performing repairs on-site or off-site, and reinstalling or returning the item to service.The unit applies to individuals working independently or under limited supervision, requiring problem-solving and decision-making to ensure a quality outcome. Repairs may be performed on items on-site or off-site and may include uninstalling and reinstalling or receiving damaged product in a workshop for repair and packaging for return to service.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.
Notes
Elements and Performance Criteria
1. Assess condition of the item
  • 1.1 Access and interpret the work order or client request to determine the scope of work
  • 1.2 Identify hazards associated with the work, and apply risk controls
  • 1.3 Assess the item and surrounding work area to determine and apply temporary solutions to prevent further damage as required
  • 1.4 Systematically inspect the item to identify damage, wear, malfunction and cosmetic defects
  • 1.5 Identify the materials, construction methods and operating mechanisms of the item to inform the repair plan
  • 1.6 Determine the likely cause of the fault or failure to inform the repair and prevent recurrence
  • 1.7 Document findings and confirm the repair plan, required resources and timeline with the supervisor or client as required
2. Plan the repair process
  • 2.1 Select appropriate repair methods and techniques based on the assessment, material type and extent of damage
  • 2.2 Identify, source and prepare the necessary tools, equipment and replacement components or materials, and check for serviceability
  • 2.3 Sequence the repair tasks in a logical and efficient order, considering whether the repair will occur on-site or off-site
  • 2.4 Identify potential workplace health and safety hazards associated with the task, and apply relevant control measures
3. Carry out repairs
  • 3.1 Dismantle the item to the extent required for the repair, systematically organising components and fasteners
  • 3.2 Execute the repair plan by rectifying, replacing or refinishing damaged or faulty components using appropriate techniques
  • 3.3 Use tools and equipment in a safe and efficient manner, according to manufacturer specifications
  • 3.4 Conduct ongoing quality checks throughout the repair process to ensure work meets specification and quality standards
4. Complete and reinstate the item
  • 4.1 Reassemble the item, ensuring all components are correctly fitted and functional
  • 4.2 Test the operational function of the repaired item to confirm the fault has been rectified and that it is ready to return to service
  • 4.3 Clean the item and the work area, removing all waste and debris according to workplace and environmental procedures
  • 4.4 Reinstall or reinstate the item safely and securely in its designated location, or package and prepare for return
  • 4.5 Conduct a final inspection and operational test and complete required workplace documentation
No information
No information
No information
State Code National Code Title Type
BTV2 MSF30926 Certificate III in Shading and Security Screens Qualification