Unit of competency Outline

Date retreived
22/07/2026 11:03 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for basic flat-bed die cutting or embossing

Set up machine for basic flat-bed die cutting or embossing

Unit of competency
National Code
ICPCBF2250
State Code
OBP30
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
20
Description
This unit describes the skills and knowledge required to set up a machine for basic flat-bed die cutting or embossing.It applies to individuals who work under direct supervision, who are responsible for operating and monitoring equipment and machinery.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare job
  • 1.1 Identify job specifications
  • 1.2 Carry out set-up of required machinery according to manufacturer specifications
  • 1.3 Confirm availability of all job related components
2. Prepare cutting devices and dies
  • 2.1 Select and secure cutting devices and dies as required
  • 2.2 Register and proof selected cutting devices and dies
  • 2.3 Mount selected cutting devices and dies
3. Prepare delivery system
  • 3.1 Set up and adjust delivery systems
  • 3.2 Add substrate to and remove substrate from process according to job specifications
4. Set up machine
  • 4.1 Set up and adjust selected flat-bed cutting and embossing devices
  • 4.2 Set and adjust cutting and embossing pressures
  • 4.3 Set machine lays to required position for registration
5. Set up in-line units for basic processes
  • 5.1 Set up minor in-line units for basic processes and adjust according to machine requirements and job specifications
  • 5.2 Provide assistance for the set up of major in-line units
6. Conduct sample run
  • 6.1 Set up and operate machine to produce a specified sample according to work health and safety (WHS) requirements, manufacturer specifications and enterprise procedures
  • 6.2 Inspect and test sample as required according to enterprise procedures
  • 6.3 Interpret results and determine adjustment requirements
  • 6.4 Carry out adjustments according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
AUN12 ICPCBF225 Set up machine for basic flat-bed die cutting or embossing Unit of competency