Unit of competency Outline

Date retreived
23/07/2026 6:45 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up machine for basic flat-bed die cutting or embossing

Set up machine for basic flat-bed die cutting or embossing

Unit of competency
National Code
ICPCBF225
State Code
AUN12
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
20
Description
This unit describes the skills and knowledge required to set up a machine for basic flat-bed die cutting or embossing.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare job
  • 1.1 Job specifications are read and interpreted from job documentation or production control system
  • 1.2 Set-up is carried out correctly in minimum time with minimum wastage
  • 1.3 Availability of all job related components is checked
2. Prepare cutting or embossing devices
  • 2.1 Appropriate cutting devices or dies are selected and secured to machine
  • 2.2 Cutting devices or dies are registered and proofed
  • 2.3 Cutting devices or dies are correctly mounted
3. Set up delivery system
  • 3.1 Delivery systems are set up and adjusted
  • 3.2 Substrate is added to and removed from the process according to job specifications
4. Set up machine
  • 4.1 Flat-bed cutting or embossing devices are set up and adjusted
  • 4.2 Cutting/embossing pressures are set up and adjusted
  • 4.3 Machine lays are set to correct position for registration
5. Set up in-line units for basic processes
  • 5.1 Minor in-line printing/converting/binding units are set up for basic processes and adjusted according to machine requirements and job specifications
  • 5.2 Assistance is given in set up of major in-line printing/converting/binding units
6. Conduct sample run
  • 6.1 Material to be used for sample is organised correctly
  • 6.2 Machine is set up and operated to produce a specified sample according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures
  • 6.3 Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures
  • 6.4 Results are interpreted to determine adjustment requirements
  • 6.5 Adjustments are carried out according to product and machine specifications
No information
No information
Replaces
State Code National Code Title Type
D3021 ICPCF225C Set up machine for basic flat-bed die cutting or embossing Unit of competency
Replaced By
State Code National Code Title Type
OBP30 ICPCBF2250 Set up machine for basic flat-bed die cutting or embossing Unit of competency