Unit of competency Outline

Date retreived
22/07/2026 11:44 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Waterproof canvas products

Waterproof canvas products

Unit of competency
National Code
LMTTF2013A
State Code
W7472
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
16/07/2011
View on TGA
State Implementation and Classification
Approved Date
24/10/2014
Field of Education
030105 - Textile Making
Original Release Date
24/10/2014
Nominal Hours
20
Description
This unit covers the skills and knowledge required to restore the waterproof characteristics of older canvas products.
Notes
Elements and Performance Criteria
1 Select waterproofing agents, plan work and prepare work area
  • 1.1 Waterproofing agents are selected in accordance with job instructions
  • 1.2 Work is planned to maximise safety and productivity
  • 1.3 Suitable electrical power outlets are identified, if required
  • 1.4 Safe working environment is established
  • 1.5 Workplace procedures and instructions are read and interpreted
2 Select, use and store tools
  • 2.1 Appropriate hand and power tools are selected for the job
  • 2.2 Tools are examined for damage, missing components or other defects (including frayed power cords where applicable)
  • 2.3 Extension power cables are checked for knots and insulation damage
  • 2.4 Electrical tools are connected safely to power supply
  • 2.5 Safety equipment is used during tool operation in accordance with OHS practices
  • 2.6 Required tasks are performed using tools in accordance with OHS practices
  • 2.7 Tools are located in a safe position when not in use
  • 2.8 Tools and extension cords are cleaned and stored in accordance with industry and workplace OHS practices
3 Clean, inspect and report on condition of product to be waterproofed
  • 3.1 Product is laid or hung out for examination
  • 3.2 Product is inspected and areas of weakness or damage are identified
  • 3.3 Results of product inspection are reported to supervisor, and authorisation is obtained for repairs or other treatment to be performed
  • 3.4 Workplace records regarding condition of product and authorisation for repair and treatment are completed
4 Repair product and apply waterproofing agent
  • 4.1 Repairs are performed in accordance with authorisation and workplace procedures
  • 4.2 Work area is isolated from other unprotected workers
  • 4.3 Product is hung if necessary
  • 4.4 Product is cleaned prior to waterproofing
  • 4.5 Waterproofing agent is applied and allowed to air dry
  • 4.6 Spillage or excess waterproofing agent is cleaned up in accordance with workplace procedures and environmental regulations
  • 4.7 Waste products are disposed of in accordance with workplace procedures and environmental regulations
  • 4.8 Knowledge of waterproofing processes are applied to perform required tasks
5 Test waterproofing and rework if necessary
  • 5.1 Product is tested for waterproofing effectiveness
  • 5.2 Supervisor confirms result of waterproofing test and decides if further treatment is necessary
  • 5.3 Waterproofing agent is reapplied if necessary
6 Store or despatch product and clean work area
  • 6.1 Product is removed and folded for storage or dispatch as required
  • 6.2 Waterproofing equipment is cleaned and maintained in accordance with manufacturer's specifications
  • 6.3 Documentation is completed in accordance with workplace requirements
  • 6.4 Work area is cleaned and tools and electrical equipment are returned to storage
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Hand and power tools may include
brushes
brooms
rollers
spray guns
knives
scissors
sewing implements
portable ventilation fans
heat lamps
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
comply with all relevant safety requirements including safe use of waterproofing agents, hand and power tools and electrical equipment
understand work orders and follow work instructions
understand equipment and materials instructions needed for the waterproofing process
prepare product to be waterproofed and set up waterproofing equipment
perform waterproofing process
perform normal operator maintenance of work area to enable work to be conducted safely and efficiently
document and communicate work related information including reporting of faults and other problems
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment

Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment, and to information on workplace practices and OHS practices.
Competence should be demonstrated over a limited range of typical industry canvas products and waterproofing agents

Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
State Code National Code Title Type
E0958 LMTPRTF11AA Waterproof canvas products - 1 Unit of competency
E0975 LMTPRTF11BA Waterproof canvas products - 2 Unit of competency
Replaced By
State Code National Code Title Type
BAU56 MSTTF2013 Waterproof canvas products Unit of competency