Unit of competency Outline
Date retreived
22/07/2026 1:53 AM AWST
22/07/2026 1:53 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Assemble electronic components
Assemble electronic components
Unit of competency
National Code
UEEAS0001
UEEAS0001
State Code
OBZ17
OBZ17
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to assemble electronic components.It includes preparing and assembling electronic apparatus. It also includes qualify checking of assembled components.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to assemble electronic components
- 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied
- 1.2 WHS/OHS hazards are identified, risks are assessed and control measures are implemented for work preparation
- 1.3 Assembling of electronic components work instructions are obtained and applied
- 1.4 Advice is sought from work supervisor to ensure work is coordinated effectively with others
- 1.5 Materials required for work are obtained in accordance with workplace procedures
- 1.6 Tools, equipment and testing devices needed to carry out work are obtained and checked for correct operation and safety
2 Assemble electronic components
- 2.1 WHS/OHS risk control measures and workplace procedures are followed
- 2.2 Circuits are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
- 2.3 Components are placed and interconnections made in accordance with drawings or diagrams, industry standards and workplace procedures
- 2.4 Work is completed in accordance within timeframe, environment and work instructions
3 Check quality of assembled components
- 3.1 WHS/OHS risk control measures and workplace procedures for work inspection and testing are followed
- 3.2 Quality of assembled component is inspected and checked in accordance with work instruction and relevant industry standards
- 3.3 Problem-solving techniques are used where faulty component/s are identified and corrective actions completed in accordance with workplace procedures
- 3.4 Reporting is completed in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC374 | UEENEEA101A | Assemble electronic components | Unit of competency |