Qualification Outline

Date retreived
22/07/2026 9:06 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Security Assembly and Set-up

Certificate II in Security Assembly and Set-up

Qualification
National Code:
UEE21620
State Code:
BFJ3
TGA Status:
Current
DTWD Status:
Approved
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
05/10/2020
Approved Date
12/07/2021
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
324
Duration
1 Semester
Current Release Number
2.00
Current Release Date
20/12/2022
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
2.00 20/12/2022 Current Approved
1.00 05/10/2020 Replaced Approved
Description

This qualification covers competencies to select, assemble and set up wired and wireless base level security systems following prescribed routines.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Schedule
Packaging Rules
A total of 360 weighting points comprising:
- 240 core weighting points listed below; plus
- 120 general elective weighting points from the general elective units listed below.

Choose a total of 120 weightingpoints elective units from the list below, of which between 0 and 60 weighting points can be taken from Group A; and between 60 and 120 weighting points must be taken from Group B; or all 120 weighting points canbe taken from Group B.

Up to 60 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC).

There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by a * symbol on training.gov.au (TGA). Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.

Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.
1. Core Units

All core units must be completed.

State Code National Code Title Hours Type
OBY70 UEERE0001 Apply environmentally and sustainable procedures in the energy sector 18 Unit of competency
OCA55 UEECD0007 Apply work health and safety regulations, codes and practices in the workplace 18 Unit of competency
OCB99 UEEEC0003 Assemble and set up basic security systems 72 Unit of competency
OCC08 UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work 18 Unit of competency
OBX42 UEECD0019 Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
OCB19 UEECD0027 Participate in development and follow a personal competency development plan 18 Unit of competency
OCC28 UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
2. Group A: Imported and Common Elective Units

Between 0 and 60 weighting points may be taken from Group A.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
OCD34 BSBOPS203 Deliver a service to customers 40 Unit of competency
OBY02 UEECO0002 Maintain documentation 18 Unit of competency
OCC19 UEECO0016 Receive and store materials and equipment for electrotechnology work 18 Unit of competency
OBY79 UEECO0017 Source and purchase material/parts for installation or service jobs 18 Unit of competency
3. Group B: Qualification Elective Units

Between 60 and 120 weighting points must be taken from Group B; or all 120 weighting points can be taken from Group B.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
OBZ17 UEEAS0001 Assemble electronic components 36 Unit of competency
OBZ75 UEEIC0002 Assemble, enter and verify operating instructions in microprocessor equipped devices 18 Unit of competency
OBY81 UEECD0020 Fix and secure electrotechnology equipment 18 Unit of competency
OCC05 UEEDV0003 Install and connect cabling for direct access to telecommunications service 18 Unit of competency
OCB14 UEECD0025 Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits 36 Unit of competency
OBU39 ICTICT214 Operate application software packages 60 Unit of competency
OCA79 UEEAS0004 Select electronic components for assembly 18 Unit of competency
OCA64 UEECD0043 Solve problems in direct current circuits 72 Unit of competency
Replaces
State Code National Code Title Type
A111 UEE21611 Certificate II in Security Assembly and Set-up Qualification
No information
Entry Requirements

There are no entry requirements for this qualification.

Traineeships and Apprenticeships
(TR08980) SECURITY ASSEMBLY AND SETUP (LEVEL 2) Traineeship

Part-time is defined as a minimum of 20 hours per week.