Unit of competency Outline
Date retreived
23/07/2026 1:04 AM AWST
23/07/2026 1:04 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fabricate and install commercial glazing
Fabricate and install commercial glazing
Unit of competency
National Code
LMFGG3017B
LMFGG3017B
State Code
W8691
W8691
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
30/09/2008
Field of Education
040323 - Glazing
Original Release Date
30/09/2008
Nominal Hours
52
Description
This unit addresses the knowledge and skills required to plan, fabricate and install glass in commercial shopfronts, doors and windows.
Notes
Elements and Performance Criteria
1. Identify work requirements
- 1.1. Work requirements in the form of type of glass, frames and the method of fixing are identified from work instructions
- 1.2. Workplace health and safety requirements for fabrication and installation of commercial glazing, including personal protection needs, are identified and observed throughout the work
- 1.3. The process for fabricating and installing commercial glazing is identified
2. Prepare for work
- 2.1. Work sequence is planned in a logical order to suit the job
- 2.2. Tools, equipment and materials, other than glass and frames, are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
- 2.3. Type of glass to be fitted and frames is selected to match:
- 2.3.1. customer order
- 2.3.2. requirements for security, noise or light control
- 2.3.3. Australian Standards
- 2.4. Glass is checked for type, size and imperfections
- 2.5. Glass fixing method is selected according to:
- 2.5.1. specification
- 2.5.2. type of glass and frame
- 2.5.3. security requirements
- 2.5.4. sealing methods
- 2.5.5. Australian Standards
3. Identify site conditions and restraints
- 3.1. Site safety hazards are recognised and corrective action taken to reduce injury to self and others
- 3.2. Other on-site difficulties are identified and action taken to resolve in accordance with regulations and enterprise agreements
- 3.3. Special characteristics of the glass aperture are identified in relation to the effect of the glass fitting process on the finished job
- 3.4. Covering material is applied where necessary to protect existing fixtures and fittings
4. Prepare frame
- 4.1. Frame condition is assessed to ensure suitability for glazing in accordance with customer order and Australian Standards
- 4.2. Defective frames are reported for repair or replacement in accordance with workplace procedures
- 4.3. Frame is prepared (if required) to receive glass by:
- 4.3.1. cleaning
- 4.3.2. surface preparation (if required)
- 4.3.3. checking size against specification
- 4.4. Fixing and sealing materials are prepared by mixing or cutting to length as appropriate
5. Fit glass
- 5.1. Glass is fixed to the frame using the selected method and in accordance with recognised Australian and industry standards
- 5.2. Solvents and sealants are used in accordance with manufacturer recommendations and Australian Standards
- 5.3. Excess sealing material is removed
- 5.4. Glass and frame are cleaned after fixing
6. Complete work
- 6.1. Completed installation is checked to ensure compliance with customer requirements, specifications and Australian Standards
- 6.2. Workplace documentation is completed in accordance with workplace requirements
- 6.3. Work area is cleaned and left in a safe condition and rubbish removed from work area and disposed of in accordance with relevant statutory requirements and workplace requirements
- 6.4. Tools, equipment and materials are cleaned and stored following workplace procedures
- 6.5. Waste and scrap material is removed for disposal or recycling as required
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the planning and fitting of glass in commercial applications
Work is carried out in accordance with statutory requirements, environment legislation, manual handling procedures and relevant regulations and organisation insurance requirements
OHS requirements may include legislation, standards, building codes, material safety management systems and local safe operating procedures
Commercial fabrication and glazing
Commercial fabrication and glazing covers work involving the fabrication, assembly, glazing and installation of framed and frameless shop fronts and returns, fixed and operable windows, hinged, pivot, sliding and automatic doors. It may include:
toughened glass assemblies
aluminium glazing systems, including planar assemblies, curtain wall systems, spider assemblies, panel wall systems (hung and stacked)
Armourview balustrading
watertight glazing techniques, including use of silicone
Tools and equipment may include:
assembly benches
drop and up-cut saws
pneumatic
hydraulic and manual presses
frame and sash tooling
copy routers
end millers
crimpers
electric and pneumatic powered drills and screwdrivers
pop rivet guns
glue guns and general hand tools
Materials are to include but are not limited to:
all forms of flat glass and acrylic glazing products
plastic
aluminium
steel
solid timber
gaskets
sealants and adhesives
Types of glass may include but are not limited to:
annealed glass
toughened glass
laminated glass
bandit resistant glass
bullet resistant glass and heat reflective glass
Methods of glazing may include:
pocket
flush
channel
and double glazing
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices. It may include:
gauntlets
gloves
safety glasses
hard hats
safety footwear
aprons and overalls
Information and procedures
Workplace procedures relating to fitting of glass for commercial applications
On-site procedures and regulations relating to the handling and movement of glass
Work instructions including job sheets, cutting lists, plans, patterns, templates, drawings and/or designs
Safety standards, include personal protective equipment, OHS regulations and enterprise requirements
Australian Standards:
AS1228 Glass in buildings, selection and installation
AS4667 Quality requirements for cut size and processed glass
AS2047 Windows in buildings, selection and installation
AS2208 Safety glazing materials in buildings
AS2343 Bullet resistant panels and elements
AS3555 Intruder resistant building panels
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the planning and fitting of glass in commercial applications
Work is carried out in accordance with statutory requirements, environment legislation, manual handling procedures and relevant regulations and organisation insurance requirements
OHS requirements may include legislation, standards, building codes, material safety management systems and local safe operating procedures
Commercial fabrication and glazing
Commercial fabrication and glazing covers work involving the fabrication, assembly, glazing and installation of framed and frameless shop fronts and returns, fixed and operable windows, hinged, pivot, sliding and automatic doors. It may include:
toughened glass assemblies
aluminium glazing systems, including planar assemblies, curtain wall systems, spider assemblies, panel wall systems (hung and stacked)
Armourview balustrading
watertight glazing techniques, including use of silicone
Tools and equipment may include:
assembly benches
drop and up-cut saws
pneumatic
hydraulic and manual presses
frame and sash tooling
copy routers
end millers
crimpers
electric and pneumatic powered drills and screwdrivers
pop rivet guns
glue guns and general hand tools
Materials are to include but are not limited to:
all forms of flat glass and acrylic glazing products
plastic
aluminium
steel
solid timber
gaskets
sealants and adhesives
Types of glass may include but are not limited to:
annealed glass
toughened glass
laminated glass
bandit resistant glass
bullet resistant glass and heat reflective glass
Methods of glazing may include:
flush
channel
and double glazing
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and enterprise policies and practices. It may include:
gauntlets
gloves
safety glasses
hard hats
safety footwear
aprons and overalls
Information and procedures
Workplace procedures relating to fitting of glass for commercial applications
On-site procedures and regulations relating to the handling and movement of glass
Work instructions including job sheets, cutting lists, plans, patterns, templates, drawings and/or designs
Safety standards, include personal protective equipment, OHS regulations and enterprise requirements
Australian Standards:
AS1228 Glass in buildings, selection and installation
AS4667 Quality requirements for cut size and processed glass
AS2047 Windows in buildings, selection and installation
AS2208 Safety glazing materials in buildings
AS2343 Bullet resistant panels and elements
AS3555 Intruder resistant building panels
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order/job instruction and locate and apply relevant information to fabricate and install commercial glazing
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
To complete a minimum of:
measuring for the installation of commercial windows, shopfronts and doors
work from product specification data sheets and specified software programs
identify and select product materials in relation to wind loading requirements.
fabricate frame and sash components including cutting, tooling/milling, routing, drilling and crimping
identify, select and install component hardware, including weather seals, wheels, stays, hinges and COC pivots, guides and locks
select and cut glass to AS1288 and AS4667
assemble frames, including glass, gaskets, tapes, sealants, adhesives, fasteners in accordance with AS2047
install commercial windows, framed and frameless shop fronts and returns, supporting fins and doors
calculate the cost of commercial windows, shopfronts and doors
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Frames, glass, fixing material, sealants, workplace operating procedures and work orders, personal protective equipment and an appropriate work area/site.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be in conjunction with assessment of other relevant units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant fabrication and installation equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order/job instruction and locate and apply relevant information to fabricate and install commercial glazing
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
To complete a minimum of:
measuring for the installation of commercial windows, shopfronts and doors
work from product specification data sheets and specified software programs
identify and select product materials in relation to wind loading requirements.
fabricate frame and sash components including cutting, tooling/milling, routing, drilling and crimping
identify, select and install component hardware, including weather seals, wheels, stays, hinges and COC pivots, guides and locks
select and cut glass to AS1288 and AS4667
assemble frames, including glass, gaskets, tapes, sealants, adhesives, fasteners in accordance with AS2047
install commercial windows, framed and frameless shop fronts and returns, supporting fins and doors
calculate the cost of commercial windows, shopfronts and doors
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Frames, glass, fixing material, sealants, workplace operating procedures and work orders, personal protective equipment and an appropriate work area/site.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be in conjunction with assessment of other relevant units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant fabrication and installation equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0338 | LMFGG3017A | Fabricate and install commercial glazing | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7833 | LMFGG3017C | Fabricate and install commercial glazing | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W034 | LMF30602 | Certificate III in Glass and Glazing | Qualification |