Unit of competency Outline

Date retreived
22/07/2026 11:44 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Calibrate measuring equipment

Calibrate measuring equipment

Unit of competency
National Code
AUMATK005
State Code
WH913
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030715 - Precision Metalworking
Original Release Date
11/03/2014
Nominal Hours
35
Description
This unit describes the performance outcomes required to calibrate mechanical, electrical and gas measuring equipment used in automotive development.It applies to those in an automotive and related component manufacturing environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to calibrate equipment
  • 1.1 Calibration instructions, work plans and workplace checklists are read and interpreted to identify processes
  • 1.2 Calibration equipment is checked for accuracy and currency
  • 1.3 Testing sequence and specified procedures are determined according to industry standards, manufacturer instructions and workplace procedures
2. Regulate equipment
  • 2.1 Calibration equipment is used and readings are recorded according to workplace procedures
  • 2.2 Calibration equipment is adjusted according to instructions
  • 2.3 Calibration equipment is re-tested to validate adjusted reading
3. Complete work processes
  • 3.1 Calibration equipment is re-tagged with currency and standard of calibration
  • 3.2 Evidence of wear, malfunction or out-of-tolerance adjustments is detected, reported and repaired within scope of authority
  • 3.3 Equipment and tools are cleaned, inspected for serviceable condition, and stored at the completion of the process
  • 3.4 Work area is cleaned and restored according to workplace procedures
No information
No information
No information
State Code National Code Title Type
J831 AUM40113 Certificate IV in Automotive Manufacturing Qualification