Unit of competency Outline
Date retreived
23/07/2026 11:15 PM AWST
23/07/2026 11:15 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Develop electrical integrated systems
Develop electrical integrated systems
Unit of competency
National Code
UEEIC0011
UEEIC0011
State Code
OCB17
OCB17
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
12/07/2021
Nominal Hours
18
Description
This unit involves the skills and knowledge required to develop electrical integrated systems.It includes working safely; analysing and adapting project specifications, device applications and capabilities; system programming methods using diagnostic tools in developing and documenting an electrical integrated system.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to develop an electrical integrated system
- 1.1 Types and locations of loads and control devices are determined from project specifications and customer requirements
- 1.2 Number of control bus networks and current requirements are determined from load calculations for devices
- 1.3 Appropriate placement of system devices in system scheme is determined from bus network power and load parameters whilst maintaining system stability
- 1.4 Integrated system is developed to comply with regulator safety and manufacturer specifications
- 1.5 Number of devices and accessories required for the system is documented using manufacturer title and identification (ID) for each component
- 1.6 Relevant programming and diagnostic tools are downloaded to compatible computer and checked for accurate operation and safety
2 Program integrated system devices
- 2.1 Hazards are identified, risks assessed and control measures implemented
- 2.2 Modes of programming are applied to developing the electrical integrated system in accordance with manufacturer and programming software instructions
- 2.3 Manufacturer instructions and recommendations are followed when programming system devices to project specifications
- 2.4 Parameters for operation of loads are programmed to project specifications within manufacturer designated range
- 2.5 Programmed system database is saved and backed up in accordance with manufacturer instructions
3 Load and test electrical integrated system
- 3.1 Work health and safety (WHS)/occupational health and safety (OHS) risk control work measures and workplace procedures are followed
- 3.2 Database of integrated system programs are transferred to the network in accordance with workplace procedures
- 3.3 Integrated system functions are tested for compliance with project and manufacturer specifications
- 3.4 Diagnostic tools are used to locate system faults, defects or anomalies
- 3.5 Defects or anomalies are corrected to comply with project requirements and manufacturer specifications
- 3.6 Integrated system is documented and a copy given to client/representative
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC657 | UEENEEI141A | Develop electrical integrated systems | Unit of competency |