Unit of competency Outline

Date retreived
22/07/2026 11:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test installed security equipment and systems

Test installed security equipment and systems

Unit of competency
National Code
CPPSEC3037
State Code
OBI96
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/09/2019
View on TGA
State Implementation and Classification
Approved Date
20/05/2020
Field of Education
029901 - Security Science
Original Release Date
20/05/2020
Nominal Hours
20
Description
This unit specifies the skills and knowledge required to test a range of installed security equipment and systems including cable systems, equipment components and programming. It includes selecting and carrying out tests to confirm the integrity, security and safety of equipment and systems. This work applies in extra low voltage environments as defined in Australian Standard AS/NZS2201.1:2007 Intruder alarm systems - Client’s premises - Design, installation, commissioning and maintenance (AS/NZS 2201).A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Licensing, legislative or certification requirements apply to advising on, supplying, installing, maintaining, monitoring, repairing and servicing security equipment in some states and territories. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Prepare to test installed security equipment and system.
  • 1.1 Review work instructions to confirm client and site requirements and testing timeframes.
  • 1.2 Review AS/NZS 2201 to understand regulatory requirements associated with testing installed security equipment and systems and apply to work instructions.
  • 1.3 Review and follow workplace policies and procedures including work health and safety when carrying out work tasks.
  • 1.4 Confirm type of security equipment and system to be tested and clarify testing parameters.
2 Plan and organise work tasks.
  • 2.1 Plan and prioritise work tasks allowing sufficient time to meet work instructions.
  • 2.2 Select and organise required materials, tools and equipment including personal protective equipment and check for safe and correct operation.
  • 2.3 Arrange access to installed security equipment and system in consultation with relevant persons.
  • 2.4 Identify hazards in the work area and apply risk control measures.
3 Conduct security equipment and system testing procedures.
  • 3.1 Use safe work practices when working with electronic equipment and cables according to WHS requirements.
  • 3.2 Identify, isolate, tag and test cables according to WHS requirements.
  • 3.3 Remove parts and connections of security equipment and system following approved procedures and store safely to protect against loss or damage.
  • 3.4 Carry out testing procedures following manufacturers’ instructions.
  • 3.5 Check to confirm accuracy and reliability of test data and conduct additional required tests or seek assistance from relevant persons.
  • 3.6 Reassemble security equipment and system to pre-test condition following manufacturers’ instructions.
4 Finalise testing activities and documentation.
  • 4.1 Check security equipment and system to confirm correct operation and conformance with work instructions.
  • 4.2 Complete documentation detailing testing results according to workplace and regulatory requirements.
  • 4.3 Notify work completion to relevant persons.
  • 4.4 Check tools and equipment for faults, wear or damage and rectify or report problems.
  • 4.5 Restore work area to original condition and remove waste caused by work tasks.
No information
No information
Replaces
State Code National Code Title Type
D1438 CPPSEC3037A Test installed security equipment and system Unit of competency