Unit of competency Outline

Date retreived
22/07/2026 1:33 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

CARRY OUT BASIC HULL SERVICING

CARRY OUT BASIC HULL SERVICING

Unit of competency
National Code
TDMMB1907B
State Code
S5355
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
19/06/2007
View on TGA
State Implementation and Classification
Approved Date
01/03/2012
Field of Education
031703 - Marine Construction
Original Release Date
01/03/2012
Nominal Hours
9
Description
UNIT DESCRIPTOR:This unit involves the skills and knowledge required to carry out basic hull servicing on a small commercial coastal vessel within the limits of responsibility of Marine Engine Drivers Grades 2 and 3.
Notes
Elements and Performance Criteria
1 Carry out basic hull inspection and servicing procedures
  • a Inspections of the vessel's hull, propeller and underwater equipment are carried out on a slipway within limits of responsibility as per standard procedures
  • b Any deterioration of a vessel's structure, fittings, propeller and underwater equipment is identified and appropriate basic servicing action initiated or carried out in accordance with company procedures
  • c Records of servicing work are completed as per standard procedures
2 Maintain watertight integrity of a small vessel
  • a Checks and inspections on the watertight integrity of the vessel is in accordance with company procedures and safety regulations
  • b Dangers to watertight integrity are identified and appropriate action is taken to report and rectify or minimise the hazards
  • c Repairs and corrosion control are initiated and carried out in accordance with company procedures and manufacturer's instructions
  • d Records of repairs and corrosion control and action to ensure watertight integrity are complete, accurate and comply with company procedures
  • e All underwater openings and equipment are checked prior to returning vessel to the water
3 Select and use servicing equipment and materials
  • a Tools and equipment are correctly identified and used in accordance with OH&S requirements, company procedures and manufacturer's instructions
  • b Defective tools, equipment and materials are identified and reported, repaired and/or replaced as required by company procedures
  • c Servicing equipment is correctly cleaned and stored after use
4 Follow safety and hazard control procedures
  • a All required safety and pollution control precautions and regulations are followed when carrying out basic hull servicing
  • b Operational hazards are identified and action is taken to minimise or eliminate risk to personnel, ship and the environment
  • c Safety and hazard minimisation procedures and regulations are followed at all times during basic hull servicing
  • d Where relevant, procedures and precautions necessary for entry into confined spaces on a vessel are correctly followed after authorisation by a responsible person
No information
No information
Replaces
State Code National Code Title Type
S2071 TDMMB1901A Carry out basic hull servicing Unit of competency
Replaced By
State Code National Code Title Type
WG380 MARC2002A Maintain hull out of water Unit of competency
WH809 MARC002 Maintain hull out of water Unit of competency