Unit of competency Outline

Date retreived
22/07/2026 4:05 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Add reinforcements and attachments

Add reinforcements and attachments

Unit of competency
National Code
LMTTF2004A
State Code
W7463
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
16/07/2011
View on TGA
State Implementation and Classification
Approved Date
24/10/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
24/10/2014
Nominal Hours
40
Description
This unit covers the skills and knowledge required to add reinforcing materials and attachments to canvas and sail products.
Notes
Elements and Performance Criteria
1 Select procedures and plan the work
  • 1.1 Required accessories, attachments and reinforcements, and nature of the materials involved are ascertained from work instructions
  • 1.2 Appropriate procedures for adding the accessories, attachments and reinforcements are ascertained from work instructions
  • 1.3 Work is sequenced to maximise safety and productivity
  • 1.4 Workplace procedures and instructions are read and interpreted
2 Prepare work area, set out work piece and prepare items to be added
  • 2.1 Safe working environment is established
  • 2.2 Suitable electrical power outlets are identified, if required
  • 2.3 Work piece is set out
  • 2.4 Assistance in handling the work piece is obtained, if necessary
3 Select, use and store tools
  • 3.1 Appropriate hand and power tools are selected for the job
  • 3.2 Tools are examined for damage, missing components or other defects (including frayed power cords where applicable)
  • 3.3 Extension power cables are checked for knots and insulation damage
  • 3.4 Electrical tools are connected safely to power supply
  • 3.5 Safety equipment is used during tool operation in accordance with OHS practices
  • 3.6 Required tasks are performed using tools in accordance with OHS practices
  • 3.7 Tools are located in a safe position when not in use
  • 3.8 Tools and extension cords are cleaned and stored in accordance with industry and workplace OHS practices
4 Mark out work piece for addition of required items
  • 4.1 Items to be added are obtained, checked for correct features and operation, and prepared for fitting or attachment
  • 4.2 Datum points are located in accordance with work instructions
  • 4.3 Locations of accessories, attachments, reinforcements or openings are marked out on the work piece in accordance with work instructions
5 Fit accessories
  • 5.1 Items are inserted or fitted in accordance with workplace requirements, customer requirements and accepted industry practice
  • 5.2 Simple reinforcements, gussets and corner pieces are stitched, riveted, welded or attached by other appropriate means
  • 5.3 Zippers, straps, buckles, eyelets, shorteners, lugs, webbing, velcro tags are inserted or attached
  • 5.4 Knowledge of fitting accessories and attachment processes are applied to perform required tasks
6 Inspect quality, labelling and documentation
  • 6.1 Completed work is informally inspected to check that it appears to be of an acceptable standard
  • 6.2 Rework is performed or other appropriate action arranged
  • 6.3 Completed product is labelled or tagged and any necessary documentation completed in accordance with workplace practices
7 Clean up and maintain equipment
  • 7.1 Work area is cleaned and tools and equipment are stored away
  • 7.2 Maintenance which is within the province of the operator is performed
  • 7.3 Supervisor is informed of any abnormal conditions needing maintenance or repair
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Power tools may include
drills
electric staple guns
pop-riveting guns
Tools may include
lifting and hoisting
equipment
measuring equipment
spanners
pliers
screwdrivers
knives
scissors
hacksaws
hammers
files
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
comply with all relevant safety requirements including safe use of hand and power tools and electrical equipment
understand work orders including simple drawings and attachment instructions
understand fitting instructions for attachment and materials
perform preparation and simple marking out of work piece for addition of specified items
fit specified items
perform normal operator maintenance of work area to enable work to be conducted safely and efficiently
document and communicate work related information including reporting of faults and other problems
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment

Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment, and to information on workplace practices and OHS practices.

Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
State Code National Code Title Type
E0956 LMTPRTF07AA Add reinforcements and attachments - 1 Unit of competency
E0971 LMTPRTF07BA Add reinforcements and attachments - 2 Unit of competency
Replaced By
State Code National Code Title Type
BAU65 MSTTF2004 Add reinforcements and attachments Unit of competency