Unit of competency Outline

Date retreived
23/07/2026 2:32 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and operate universal vehicle measuring systems

Set up and operate universal vehicle measuring systems

Unit of competency
National Code
AURVTN029
State Code
AWZ69
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to set up and use a universal measuring system to measure vehicle chassis misalignment at pre- and post-repair intervals. It involves preparing for the task, selecting and using specialist tools and equipment, setting measuring equipment, measuring vehicle upper and underbody in three dimensions, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to set up and operate universal measuring system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Set-up information is accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Measuring equipment is selected, set up, and calibrated and checked for serviceability
  • 1.5 Work is planned to complete job requirements efficiently
2. Carry out measurement activities
  • 2.1 Measuring system is secured and adjusted to vehicle according to original equipment manufacturer (OEM) or authorised agency’s recommended procedures and safety requirements
  • 2.2 Vehicle is measured in three dimensions according to OEM or authorised agency’s requirements and workplace procedures, and without causing damage to vehicle system or components
  • 2.3 Pre- and post-repair measurements are recorded according to workplace procedures
3. Complete measurement processes
  • 3.1 Final checks are made to ensure measurements are accurate, meet workplace expectations, and comply with OEM or authorised agency’s specifications
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Measuring equipment is checked and maintained according to manufacturer specifications, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF515 AURVTN3029 Set up and operate universal measuring systems Unit of competency