Unit of competency Outline
Date retreived
22/07/2026 9:28 AM AWST
22/07/2026 9:28 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate mobile load shifting equipment
Operate mobile load shifting equipment
Unit of competency
National Code
MEM11010
MEM11010
State Code
OAV62
OAV62
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
Field of Education
030717 - Plant And Machine Operations
Original Release Date
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to operate mobile load shifting equipment, including planning, moving and placing loads and shutting down and securing equipment after operation where knowledge of codes and signals is not required in workshops and/or on-site locations.Where the selection and use of hand tools is required unit MEM18001 Use hand tools should also be selected.Where the use of a forklift is required unit TLILIC0003 Licence to operate a forklift truck should also be selected.Where the use of an order picking forklift is required unit TLILIC0004 Licence to operate an order picking forklift truck should also be selected.Where the use of a vehicle loading crane with a capacity of 10 metre tonnes and above is required unit TLILIC0024 Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) should also be selected.Band: AUnit Weight: 4Depending on the equipment being used a high risk work licence may be required and users should check with the relevant state and national authorities.
Notes
Elements and Performance Criteria
1. Determine job requirements
- 1.1 Follow standard operating procedures (SOPs)
- 1.2 Comply with work health and safety (WHS) requirements at all times
- 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4 Identify job requirements from specifications, job sheets or work instructions
2. Prepare to shift loads
- 2.1 Inspect work area to identify hazards, and implement appropriate prevention/control measures to avoid hazards
- 2.2 Undertake routine pre-operational checks in accordance with manufacturers’ specifications and regulatory safety requirements
- 2.3 Inspect attachments and/or equipment
3. Check controls and equipment
- 3.1 Carry out pre-operational and post start-up equipment checks in accordance with manufacturers’ specifications and/or operating manual
- 3.2 Report defects and damage according to site procedures
4. Shift and place loads
- 4.1 Select the most appropriate load shifting device to suit load and shifting requirements
- 4.2 Operate load shifting device within design specifications and safe working load in accordance with SOPs
- 4.3 Lift load, ensuring balance, vision of operation and protection of load
- 4.4 Select and use the safe and efficient path of movement
- 4.5 Check path of movement and monitor for obstacles and hazards
- 4.6 Place loads ensuring safety, stability, protection of material and avoidance of hazards on-site
5. Shut down equipment and secure site
- 5.1 Park machinery in accordance with procedures, avoiding site and equipment hazards
- 5.2 Conduct shutdown in accordance with manufacturers’ specification to isolate vehicles
- 5.3 Complete post-operational check in accordance with operational procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W5465 | MEM11010B | Operate mobile load shifting equipment | Unit of competency |