Unit of competency Outline

Date retreived
22/07/2026 11:32 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out basic demolition

Carry out basic demolition

Unit of competency
National Code
CPCCCM2009
State Code
OCQ99
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040301 - Building Science And Technology
Original Release Date
01/06/2021
Nominal Hours
16
Description
This unit of competency specifies the skills and knowledge required remove components from single storey buildings and structures using basic demolition techniques. It includes the preparation of the site for the demolition process and the removal of components.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare for basic demolition.
  • 1.1 Read and interpret site demolition plan and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, workplace requirements, drawings and specifications.
  • 1.3 Select and use personal protective equipment (PPE) for each part of the task.
  • 1.4 Select tools and equipment, check for serviceability and report any faults.
2 Prepare demolition site and erect safety equipment.
  • 2.1 Inspect work site to assess hazards and determine risk controls.
  • 2.2 Confirm with supervisor or regulatory authorities that existing services have been disconnected.
  • 2.3 Install signs and barriers around the demolition site and to identify underground and above-ground services.
  • 2.4 Identify and report hazardous material for separate demolition and handling.
3 Remove building components.
  • 3.1 Remove building components in sequence and in accordance with site demolition plan, demolition method statement, standards and workplace procedures.
  • 3.2 Remove components to storage or disposal area using safe materials handling techniques.
4 Check and store tools and equipment.
  • 4.1 Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.
  • 4.2 Check, maintain and store tools and equipment and report any faults.
No information
No information
Replaces
State Code National Code Title Type
W9378 CPCCCM2009A Carry out basic demolition Unit of competency