Install exterior louvre shutters

Unit of competency Outline

Date retreived
23/07/2026 3:52 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
MSFBAA320

State Code
OFJ83

TGA Status
Current

DTWD Status
Pending

Current Release Number
1.00

Current Release Date
13/03/2026

View on TGA

State Implementation and Classification

Approved Date

Field of Education

Original Release Date

Nominal Hours

Description

This unit of competency describes the skills and knowledge required to install exterior louvre shutters according to job requirements. The unit involves planning job requirements, identifying required shutter products to be used and their measurements and fasteners, and applying workplace procedures to ensure their safe and correct installation.The unit applies to individuals working under limited supervision to install exterior louvre shutters in residential and commercial environments. The shutters may be installed in a range of openings, including windows, fixed and sliding doors, and building entrances. They may be installed on a range of surfaces, including aluminium, ceramic tiles, porcelain tiles, concrete, masonry, plasterboard and timber.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.

Notes

Elements and Performance Criteria

1. Prepare for installation of exterior louvre shutters

1.1 Identify job and shutter requirements from work order and supplier instructions
1.2 Consult with customer to confirm access and installation requirements, including type of exterior louvre shutter to be installed and location of installation
1.3 Assess installation site, existing services and substrate material to confirm it is safe and suitable for installation
1.4 Identify and apply workplace health and safety and personal protection requirements of installation
1.5 Plan logical, safe and efficient work sequence that reflects work order and quality requirements

2. Fit and fasten exterior louvre shutters

2.1 Identify and select required materials, tools, equipment and accessories based on work order, and check their safe and effective operation
2.2 Set up required materials, equipment and shutter mechanisms in line with work instructions and manufacturer specifications
2.3 Fit shutter to opening according to work order, type of exterior louvre shutter and manufacturer specifications
2.4 Fix shutter according to shutter type, work order and opening surface using required fixing hardware in line with supplier instructions and workplace procedures
2.5 Test installed shutter for correct operation within limits of normal operation, and adjust and repair performance problems in line with own level of responsibility

3. Finalise installation

3.1 Check that completed work complies with quality and work order requirements, and rectify identified deficiencies within scope of own role
3.2 Clean work area and surfaces, and dispose of waste safely and sustainably according to workplace procedures
3.3 Identify and store surplus unused items for re-use and/or recycling according to workplace procedures
3.4 Check, clean and store tools and equipment, and tag and report faulty items according to workplace procedures
3.5 Advise customer on correct operation and maintenance of exterior louvre shutters
3.6 Legibly complete and process required workplace and customer documentation according to workplace requirements

No information

Replaces

State Code	National Code	Title	Type
OBP22	MSFBA3015	Install louvre shutters	Unit of competency

State Code	National Code	Title	Type
BTV2	MSF30926	Certificate III in Shading and Security Screens	Qualification