Unit of competency Outline

Date retreived
22/07/2026 9:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct vehicle performance tests

Conduct vehicle performance tests

Unit of competency
National Code
AUMATA007
State Code
WH906
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030501 - Automotive Engineering
Original Release Date
11/03/2014
Nominal Hours
24
Description
This unit describes the performance outcomes required to carry out pre-road test checks on vehicles, as well as final simulated or on-road performance tests.It applies to those in an automotive manufacturing environment.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare for the job
  • 1.1 Workplace procedures are identified
  • 1.2 Vehicle to be tested is positioned and secured to prevent injury or damage
  • 1.3 Vehicle fuel and lubricant levels are checked
  • 1.4 Driver safety items are checked according to workplace procedures to ensure they are functional and suitable to vehicle specifications
  • 1.5 Temporary registration plates are fitted
  • 1.6 Pre-inspection checklist is completed
2. Test vehicle performance
  • 2.1 Vehicle is secured on chassis dynamometer for testing, if applicable
  • 2.2 Vehicle is driven and tested on-road according to state road regulations
  • 2.3 Vehicle is tested under load conditions
  • 2.4 Adjustments are made if necessary during on-road tests
3. Respond to faults
  • 3.1 Vehicle performance test reports are completed, with faults recorded and reported to appropriate personnel
  • 3.2 Vehicle quarantine procedures are implemented to ensure faulty vehicles are not returned to customer
  • 3.3 Vehicle is placed in quarantine based on type of faults to be rectified
4. Rectify faults
  • 4.1 Vehicle reports of performance test results are used to identify faults
  • 4.2 Tools and equipment are selected and used to conduct rectification
  • 4.3 Faults are rectified so that vehicle performs to manufacturer specifications and complies with roadworthy requirements
5. Complete work processes
  • 5.1 Vehicle is retested to ensure faults have been rectified and vehicle performs to manufacturer specifications
  • 5.2 Compliance and vehicle identification plates are fitted, if applicable
  • 5.3 Final inspection and dispatch form are completed and submitted to appropriate personnel
  • 5.4 Job rectification report is completed
No information
No information
No information
State Code National Code Title Type
J831 AUM40113 Certificate IV in Automotive Manufacturing Qualification