Unit of competency Outline
Date retreived
22/07/2026 5:50 AM AWST
22/07/2026 5:50 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform aseptic techniques
Perform aseptic techniques
Unit of competency
National Code
MSL973016
MSL973016
State Code
OAC93
OAC93
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
29/11/2018
Field of Education
019909 - Laboratory Technology
Original Release Date
29/11/2018
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge to perform aseptic techniques to maintain the integrity of both the sample source and the sample. It applies to sampling techniques in tissue culture and to generic microbiological procedures.This unit of competency applies to laboratory assistants and technicians working in the field or laboratory in the biomedical, biological, food processing and environmental industry sectors.No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1 Prepare for aseptic sampling or transfer
- 1.1 Check the sampling procedure conforms with the required sampling plan
- 1.2 Use specified personal protective equipment (PPE)
- 1.3 Prepare the work area for safe and effective sample transfer
- 1.4 Select equipment and materials specified by the procedure
- 1.5 Organise equipment to minimise contamination during manipulations
- 1.6 Label containers for clear identification
- 1.7 Record details in relevant log or database
- 1.8 Macroscopically assess media and/or reagents to confirm sterility before use
2 Transfer materials aseptically
- 2.1 Protect the integrity of the sample source
- 2.2 Sterilise inoculating loops and/or pipette where used to prevent contamination
- 2.3 Perform transfer while minimising opportunities for contamination and cross-infection
- 2.4 Protect the integrity of the sample source and destination after transfer, and before sealing the transport or culture vessel
- 2.5 Re-sterilise inoculating loops, minimising the generation of aerosols as required
- 2.6 Perform quality control checks to confirm aseptic transfer was successful
- 2.7 Label transport or culture vessels for clear identification
3 Maintain work area and equipment to prevent cross-infection and contamination
- 3.1 Place disposable and reusable items into relevant receptacles
- 3.2 Clean and disinfect work area and equipment after use
- 3.3 Transport disposable and reusable contaminated materials to relevant areas for disinfection, sterilisation and cleaning or disposal
- 3.4 Follow personal hygiene procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWO20 | MSL973004 | Perform aseptic techniques | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OEX87 | MSL973027 | Perform techniques that prevent cross-contamination | Unit of competency |