Unit of competency Outline

Date retreived
22/07/2026 8:22 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform jewellery metal casting

Perform jewellery metal casting

Unit of competency
National Code
MEM19001
State Code
OAU30
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030713 - Metal Casting And Patternmaking
Original Release Date
Nominal Hours
54
Description
This unit of competency defines the skills and knowledge required to perform jewellery metal casting using the ‘lost wax’ method of investment casting. No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 6
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare metals for casting
  • 2.1 Select required metals and alloys
  • 2.2 Weigh out metals and alloys in correct wax-to-metal ratios
  • 2.3 Record data according to SOPs
3 Conduct pre-casting operations
  • 3.1 Prepare equipment according to SOPs, including checking required inert gas supply, delivery and vacuum systems
  • 3.2 Carry out required pre-heating and glazing
  • 3.3 Maintain temperature of invested flask
4 Melt jewellery metal and cast metals
  • 4.1 Apply protective coating, including borax, fluxes and inert gases to jewellery metal
  • 4.2 Heat jewellery metal to achieve casting temperature
  • 4.3 Position burn-out flask
  • 4.4 Tap molten metal, making allowance for adequate solidification time
  • 4.5 Operate furnace in accordance with SOPs
5 Perform post-casting operations
  • 5.1 Remove casting flask and store in a safe manner
  • 5.2 Clean, store and dispose of casting materials and consumables
No information
No information
Replaces
State Code National Code Title Type
W5645 MEM19001B Perform jewellery metal casting Unit of competency