Unit of competency Outline

Date retreived
22/07/2026 11:05 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and disassemble audio equipment

Install and disassemble audio equipment

Unit of competency
National Code
CUASOU308
State Code
AWG78
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
02/11/2017
View on TGA
State Implementation and Classification
Approved Date
21/07/2016
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
21/07/2016
Nominal Hours
40
Description
This unit describes the skills and knowledge required to install and disassemble audio equipment for a range of live performance and entertainment productions.It applies to individuals who work collaboratively as part of a production team to install, align, test and disassemble audio equipment for playback, mixing and recording purposes.The model Work Health and Safety (WHS) Regulations list the work that requires a high risk work licence, including dogging and rigging. Completion of the following units is required for certification at basic, intermediate and advanced levels:CPCCLDG3001A Licence to perform doggingCPCCLRG3001A Licence to perform rigging basic levelCPCCLRG3002A Licence to perform rigging intermediate levelCPCCLRG4001A Licence to perform rigging advanced level.Sets and staging for some productions may fall within the definition of construction work. Under section 274 of the WHS Act, it is a requirement of the approved Code of Practice for Construction Work that any person entering a construction site must successfully complete general construction induction training through a Registered Training Organisation. Completion of the unit CPCCOHS1001A Work safely in the construction industry fulfils this requirement.
Notes
Elements and Performance Criteria
1. Prepare for installation of audio equipment
  • 1.1 Interpret production documentation and requirements, and confirm with relevant people
  • 1.2 Assess acoustic characteristics of venue with relevant people and select appropriate equipment and accessories
  • 1.3 Calculate power requirements and identify power locations and patching requirements
  • 1.4 Confirm and organise special requirements with relevant people
2. Install audio equipment
  • 2.1 Secure and label cabling in line with production requirements
  • 2.2 Set up power distribution in line with production requirements
  • 2.3 Position microphones, accessories and cabling
  • 2.4 Confirm fitted lapel microphones meet technical performance standards
  • 2.5 Confirm phantom power is provided at microphone inputs
  • 2.6 Connect effects rack to mixer in line with production requirements
  • 2.7 Follow safe work practices when installing equipment
3. Align audio equipment
  • 3.1 Match audio equipment according to level, impedance, phase and frequency
  • 3.2 Route test signals to correct destination
  • 3.3 Confirm test signal level meets production requirements
  • 3.4 Tune the system to avoid feedback
4. Test audio equipment
  • 4.1 Check microphone lines for continuity and patching
  • 4.2 Test microphones and confirm they are functioning correctly
  • 4.3 Fit microphones to relevant people and perform sound cues as required
  • 4.4 Patch, test and tune sound reinforcement system to suit production venue
  • 4.5 Conduct sound check and document any adjustments in line with production requirements
  • 4.6 Inform relevant people of any problems that arise during testing processes
5. Disassemble audio equipment
  • 5.1 Disassemble equipment in line with production requirements
  • 5.2 Check audio equipment against inventory before packing, and report lost or damaged equipment to appropriate people
  • 5.3 Pack equipment and accessories and prepare for transit or storage in line with safe work practices and production requirements
  • 5.4 Clean and restore work environment to previous condition
  • 5.5 Seek feedback from relevant people on own work performance, and note areas for improvement
No information
No information
Replaces
State Code National Code Title Type
D2960 CUSSOU303A Set up and disassemble audio equipment Unit of competency