Unit of competency Outline

Date retreived
23/07/2026 1:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct landscape features using concrete

Construct landscape features using concrete

Unit of competency
National Code
AHCLSC317
State Code
ODU50
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
15/02/2022
View on TGA
State Implementation and Classification
Approved Date
31/05/2022
Field of Education
040301 - Building Science And Technology
Original Release Date
31/05/2022
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to construct concrete structures and features as a component of landscape project works, including preparing for work, setting out and preparing site, mixing pouring and finishing concrete, checking and cleaning up site.The unit applies to individuals who construct landscape features using concrete under broad direction, and take responsibility for their own work and for the quality of the work of others.State/territory licensing, legislative or certification requirements apply in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Plan and prepare work
  • 1.1 Interpret site plans and specifications
  • 1.2 Identify potential hazards and risks, and implement safe working practices to manage risks
  • 1.3 Check quantity and quality of materials
  • 1.4 Select tools, equipment and machinery required for construction work and check for safe operation
  • 1.5 Select, fit, use and maintain personal protective equipment (PPE) applicable to the task
  • 1.6 Identify and minimise environmental impacts of proposed concrete works
2. Set out and prepare the site
  • 2.1 Determine, locate and mark out services from site plan
  • 2.2 Mark out position of structure or feature according to site plan
  • 2.3 Establish profiles to conform to nominated tolerances
  • 2.4 Excavate site according to site plan
  • 2.5 Prepare subsoil by removing all debris, vegetable matter and topsoil to provide a solid foundation for concrete
  • 2.6 Install drainage systems according to plans and specifications
  • 2.7 Install form work on site in a manner that will ensure it remains rigid during concrete pouring operations and allow for ease of dismantling without damage to concrete
  • 2.8 Place and compact sub-base material to required finished levels
  • 2.9 Complete preparation of site according to type of structure or feature to be constructed
  • 2.10 Place expansion joints and reinforcement steel according to site plan and specifications
3. Mix and pour concrete
  • 3.1 Determine proportions for concrete mix according to strength requirements of project
  • 3.2 Determine volume of dry materials necessary to produce final concrete mix
  • 3.3 Mix together all dry ingredients and required additives to ensure a thorough blending of all materials is achieved
  • 3.4 Introduce sufficient water to produce a concrete mix to required consistency
  • 3.5 Perform concrete slump test
  • 3.6 Pour concrete to designated levels in a manner to avoid segregation of materials
  • 3.7 Consolidate concrete using an approved vibration method
4. Finish concrete
  • 4.1 Screed concrete to desired finished level
  • 4.2 Apply appropriate trowelling techniques
  • 4.3 Finish concrete off according to site plan and specifications
  • 4.4 Install control joints according to site plan and specifications
5. Check quality of work and clean-up site
  • 5.1 Inspect quality of finished works to ensure required standard has been achieved
  • 5.2 Remove and clean form work to allow reuse
  • 5.3 Ensure all clean-up works minimise impact to environment
  • 5.4 Clean, maintain and store tools and equipment
  • 5.5 Identify and report unserviceable tools and equipment according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
BAN02 AHCLSC302 Construct landscape features using concrete Unit of competency
State Code National Code Title Type
BHN2 AHC30921 Certificate III in Landscape Construction Qualification
BHT3 SIT30122 Certificate III in Tourism Qualification
BOE4 SIT30125 Certificate III in Tourism Qualification