Unit of competency Outline

Date retreived
23/07/2026 4:29 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut printed materials by machine

Cut printed materials by machine

Unit of competency
National Code
MSTFP2003
State Code
BAW40
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
01/12/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to cut uniform synthetics and printed leathers using machines, knives and interlocking knives.The unit of competency applies to cutting uniform leather or synthetic materials that have been treated or printed to achieve a uniform finish, and to meet specifications and workplace quality standards. It involves the limited application of discretion, initiative and judgement while working to defined procedures and methods.Work may be conducted in small to large scale enterprises and may involve individual and team activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to cut printed materials by machine
  • 2.1 Prepare workstation and work before commencing operations
  • 2.2 Assess materials against job specifications
  • 2.3 Check various types and finishes of materials according to work ticket
  • 2.4 Sort materials according to colour and shade and other specifications
3 Carry out minor maintenance safely
  • 3.1 Start up and shut down machines according to safety regulations
  • 3.2 Regularly clean cutting board, turn and maintain
  • 3.3 Regularly check striker plate for distortion and damage and report irregularities
4 Cut linings and components from materials by press or hand
  • 4.1 Select knives according to job specifications and size requirements and use according to WHS practices
  • 4.2 Adjust pressures on press to knife sizes and shapes
  • 4.3 Follow work ticket specifications according to pairs and pieces
  • 4.4 Cut parts to workplace quality standards in relation to material flaws
  • 4.5 Select individual pairs, colour and grain match to workplace quality standards
  • 4.6 Cut pairs to achieve best yield according to appropriate allowance
  • 4.7 Identify distortions and defects on press cutting knives, dies and cutting boards, and take appropriate action
5 Check finished product
  • 5.1 Check finished product against workplace quality standards
  • 5.2 Address faults
  • 5.3 Maintain required records of work
No information
No information
Replaces
State Code National Code Title Type
W7272 LMTFP2003B Cut printed materials by machine Unit of competency