Qualification Outline
22/07/2026 6:44 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate IV in Custom-Made Footwear
Certificate IV in Custom-Made Footwear
MST40316
BDH3
Current
Approved
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 5.00 | 22/12/2022 | Current | Approved |
| 4.00 | 13/04/2021 | Replaced | Approved |
| 3.00 | 31/01/2020 | Replaced | Approved |
| 2.00 | 25/07/2019 | Replaced | Approved |
| 1.00 | 04/07/2016 | Replaced | Approved |
Description
This qualification provides skills and knowledge to perform technical and production work in the design and development of custom-made footwear or footwear that involves small production quantities.
No occupational licensing or certification requirements exist at the time of publication.
Schedule
Packaging Rules
Total number of units = Twenty-five (25)- Nine (9) core units of competency
- Sixteen (16) elective units of competency, consisting of:
- at least five (5) units from Group A
- at least three (3) units from Group B
- up to eight (8) units (not previously selected) from Group A, B and/or C
- up to four (4) units from any endorsed Training Package or accredited course where those units are available at Certificate III, Certificate IV or Diploma level. These units must be relevant to the work outcome and not duplicate units available within this qualification.
1. Core Units
All nine (9) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| BAK44 | MSS402051 | Apply quality standards | 30 | Unit of competency |
| BAW20 | MSTFP4004 | Assemble and finish custom-made shoe | 80 | Unit of competency |
| BAW25 | MSTFP4001 | Develop design for custom-made footwear | 80 | Unit of competency |
| BAW21 | MSTFP4005 | Fit custom-made footwear | 80 | Unit of competency |
| BAW39 | MSTFP2001 | Identify materials used in footwear production | 50 | Unit of competency |
| BAW23 | MSTFP4002 | Make patterns for custom-made footwear | 80 | Unit of competency |
| AWC13 | MSMENV272 | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| BAW22 | MSTFP4003 | Prepare, cut and sew custom-made shoe components | 80 | Unit of competency |
| AWC15 | MSMWHS200 | Work safely | 26 | Unit of competency |
2. Group A Elective Units
A minimum of five (5) units must be completed.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OEZ39 | MSTGN4020 | Contribute to the development of products or processes | 100 | Unit of competency |
| OBL68 | MSTGN4015 | Coordinate or set-up machines for product change | 60 | Unit of competency |
| OBL65 | MSTGN4016 | Coordinate the quality system and procedures | 45 | Unit of competency |
| BAV80 | MSTGN4010 | Implement and monitor WHS and environmental systems in the workplace | 60 | Unit of competency |
| OEZ41 | MSTGN4017 | Participate in product engineering | 80 | Unit of competency |
| OEZ38 | MSTGN4019 | Plan and implement production within a work area | 50 | Unit of competency |
3. Group B Elective Units
A minimum of three (3) units must be completed.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| BAW30 | MSTFP3003 | Assemble shoe by hand | 60 | Unit of competency |
| OBL71 | MSTGN3013 | Control production in a section of a TCF enterprise | 60 | Unit of competency |
| BAW28 | MSTFP3001 | Cut leather by hand | 50 | Unit of competency |
| OEZ44 | MSTGN3023 | Estimate and cost jobs | 45 | Unit of competency |
| BAV25 | MSTLG3005 | Grade leather | 60 | Unit of competency |
| BAW29 | MSTFP3002 | Hand last shoe | 60 | Unit of competency |
| OBL73 | MSTGN3014 | Organise and plan own work to achieve planned outcomes | 30 | Unit of competency |
4. Group C Elective Units
Up to eight (8) units may be completed.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W383 | LMT40407 | Certificate IV in Custom-made Footwear | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships