Unit of competency Outline

Date retreived
23/07/2026 2:06 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Troubleshoot irrigation systems

Troubleshoot irrigation systems

Unit of competency
National Code
AHCIRG306
State Code
BAN50
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
27/06/2016
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
030907 - Water And Sanitary Engineering
Original Release Date
12/01/2017
Nominal Hours
50
Description
This unit of competency describes the skills and knowledge required to troubleshoot faults and blockages in irrigation systems.It applies to individuals who take responsibility for own work and for the quality of the work of others. They use discretion and judgement in the selection, allocation and use of available resources. All work is carried out to comply with workplace procedures.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Locate and identify faulty components and blockages
  • 1.1 Determine irrigation system and component function
  • 1.2 Check and review monitoring and maintenance records
  • 1.3 Carry out operational tests
  • 1.4 Identify and document faulty components and blockages
2. Shut down and isolate component
  • 2.1 Apply shut down sequence and isolation procedures
  • 2.2 Verify safe shutdown or isolation
  • 2.3 Install safety or security lock off devices and signage
3. Replace faulty components and clear blockages
  • 3.1 Organise access to faulty components and blockages
  • 3.2 Remove faulty components and repair or dispose of
  • 3.3 Select and install replacement components
  • 3.4 Replace faulty components and clear blockages
  • 3.5 Clear blockages or replace blocked sections
4. Return system to normal operating status
  • 4.1 Return isolated or shutdown components to service
  • 4.2 Carry out operational tests
  • 4.3 Return system to normal operational set-up
  • 4.4 Report and record repair activities
No information
No information
Replaces
State Code National Code Title Type
D6877 AHCIRG306A Troubleshoot irrigation systems Unit of competency
Replaced By
State Code National Code Title Type
OBJ91 AHCIRG338 Troubleshoot irrigation systems Unit of competency