Unit of competency Outline

Date retreived
22/07/2026 4:51 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect, service and repair pneumatic systems

Inspect, service and repair pneumatic systems

Unit of competency
National Code
AURTTA007
State Code
AXB08
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to inspect, service and repair faults in pneumatic systems and components. It involves preparing for the task, inspecting the system to determine the service and repair requirements, carrying out the service and repair, performing post-repair testing, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The pneumatic systems include those of agricultural machinery, heavy commercial vehicles or mobile plant machinery. Work includes compressors, linear or rotary actuators, drive motors, conductors and control valves.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect, service and repair pneumatic system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Inspection procedures and information are sourced and interpreted
  • 1.3 Options are analysed and those most appropriate to the circumstances are selected
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools, equipment and materials are selected and checked for serviceability
2. Inspect pneumatic system
  • 2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 2.2 Faults are identified from inspection results and causes of faults are determined
  • 2.3 Inspection findings are reported according to workplace procedures, and include recommendations for necessary service, repairs or adjustments
3. Carry out service and repair activities
  • 3.1 Service and repair procedures and information are sourced and interpreted
  • 3.2 Service and repair tools, equipment and materials are selected and checked
  • 3.3 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.4 Repairs and component replacements and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.5 Post-repair testing is carried out according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF375 AURTTA2007 Inspect, service and repair pneumatic systems Unit of competency