Unit of competency Outline

Date retreived
23/07/2026 3:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and store vehicle body components

Remove and store vehicle body components

Unit of competency
National Code
AURVTN003
State Code
AWZ90
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
24
Description
This unit describes the performance outcomes required to perform pre-repair activities by removing and storing vehicle body components. It involves preparing for the task, selecting and using specialist tools and equipment, following workplace instructions in removing, tagging and storing body components as part of pre-repair requirements, and completing workplace processes and documentation.It applies to those working in the automotive body service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and store vehicle body components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Workplace procedures and recommended procedures and specifications are sourced and interpreted from original equipment manufacturer (OEM) or authorised agency
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.5 Work is planned to minimise waste according to workplace procedures
2. Remove, tag and store components
  • 2.1 Vehicle components are removed according to specifications of OEM or authorised agency
  • 2.2 Components are tagged and stored according to workplace procedures and without causing damage to system or components
  • 2.3 Additional parts required to complete repair are identified, listed and reported
3. Clean components prior to repair and storage
  • 3.1 Vehicle components are cleaned using recommended cleaning methods and materials according to safety and environmental requirements
  • 3.2 Vehicle components are inspected for damage and repaired according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and components are presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF486 AURVTN2003 Carry out pre-repair vehicle body operations Unit of competency