Unit of competency Outline
Date retreived
22/07/2026 9:20 PM AWST
22/07/2026 9:20 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce computer-aided drawings
Produce computer-aided drawings
Unit of competency
National Code
CUAACD302
CUAACD302
State Code
AWK34
AWK34
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
21/07/2016
Field of Education
100501 - Graphic Arts And Design Studies
Original Release Date
21/07/2016
Nominal Hours
60
Description
This unit describes the skills and knowledge required to use a range of computer-aided design and drafting (CADD) program functions to produce drawings. The focus of this unit is on the technical skills required to operate CADD, not on design skills.It applies to individuals who use computer-aided drawing skills in various contexts.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for computer-aided drawing work
- 1.1 Clarify drawing requirements in concept or project information
- 1.2 Identify hardware, software, tools and equipment required for computer-aided design and drafting projects
- 1.3 Set up hardware and software according to operating instructions and organisational procedures
- 1.4 Identify and retrieve digitised information relevant to projects
2. Gather object parameters and/or measurements
- 2.1 Establish and record critical dimensions and data for required designs
- 2.2 Identify requirements in relation to accuracy, tolerances and other key information
3. Prepare plots or drawings
- 3.1 Access and use CADD functions and features according to operating instructions
- 3.2 Access and use peripheral equipment required for projects
- 3.3 Prepare and review preliminary drawings in consultation with relevant people
4. Finalise drawings
- 4.1 Check designs against project objectives and specifications according to organisational procedures
- 4.2 Identify and make required adjustments to designs based on review and consultation with relevant people
- 4.3 Store data files according to operating instructions and organisational procedures
- 4.4 Submit final drawings within agreed time parameters
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7600 | CUVACD302A | Produce computer-aided drawings | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| ODD24 | CUAACD312 | Produce computer-aided drawings | Unit of competency |