Unit of competency Outline
Date retreived
23/07/2026 10:29 PM AWST
23/07/2026 10:29 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Produce computer-aided drawings
Produce computer-aided drawings
Unit of competency
National Code
CUAACD312
CUAACD312
State Code
ODD24
ODD24
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
26/11/2021
Field of Education
100501 - Graphic Arts And Design Studies
Original Release Date
26/11/2021
Nominal Hours
60
Description
This unit describes the skills and knowledge required to use different computer-aided design and drafting (CADD) program functions to produce drawings and documentation. It involves preparing to undertake the work, understanding the object or project brief parameters and measurements and finalising drawings according to requirements. The focus of this unit is on the technical skills required to operate CADD, not on design skills.The unit applies to those who use computer-aided drawing skills in various contexts.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for computer-aided drawing work
- 1.1 Clarify drawing requirements and objectives in concept or project information
- 1.2 Identify hardware, software, tools and equipment required for computer-aided design and drafting projects
- 1.3 Set up hardware and software according to operating instructions and organisational procedures as required
- 1.4 Identify and retrieve digitised information required for projects
2. Gather object parameters and measurements
- 2.1 Establish and record critical dimensions and data for required designs
- 2.2 Identify requirements in relation to accuracy, tolerances and other information according to drawing requirements
3. Prepare plots or drawings
- 3.1 Access and use CADD functions and features according to operating instructions
- 3.2 Access and use peripheral equipment required for projects
- 3.3 Prepare and review preliminary drawings in consultation with required personnel
4. Finalise drawings
- 4.1 Check designs against project objectives and specifications and mark up documentation according to organisational procedures
- 4.2 Identify and make required adjustments to designs in consultation with required personnel
- 4.3 Store data files according to operating instructions and organisational procedures
- 4.4 Submit final drawings within agreed time parameters
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWK34 | CUAACD302 | Produce computer-aided drawings | Unit of competency |