Unit of competency Outline
Date retreived
23/07/2026 9:58 AM AWST
23/07/2026 9:58 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Install automation and intelligent management systems
Install automation and intelligent management systems
Unit of competency
National Code
MSFBAA311
MSFBAA311
State Code
OFJ99
OFJ99
TGA Status
Current
Current
DTWD Status
Pending
Pending
State Implementation and Classification
Approved Date
Field of Education
031301 - Electrical Engineering
Original Release Date
Nominal Hours
Description
This unit of competency describes the skills and knowledge required to select, fit and install technology, automation and intelligent management systems. The unit involves fitting and testing the item against quality and compliance indicators and requirements so that the installation complies with industry-accepted standards.The unit applies people who install and connect automation, working under limited supervision installing and connecting technology, automation, or intelligent management systems in a range of items, which may include shading and security screens, cabinetry and fitted furniture.Where installed control devices involve hardwiring to be connected to mains power, electrical work must be completed by a qualified licensed electrician.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.
Notes
Elements and Performance Criteria
1. Prepare for installation of automation
- 1.1 Identify job and installation requirements from work order and visual representations of installation design
- 1.2 Identify workplace health and safety and personal protection requirements of installation according to workplace procedures
- 1.3 Identify and select required installation items based on the work order
- 1.4 Identify and select tools, equipment and accessories to be used during installation, and check their safe and effective operation
- 1.5 Clean and prepare surfaces to enable accurate fitting
2. Install and test automation
- 2.1 Take accurate measurements and fit item according to design requirements
- 2.2 Secure item using fitting tools according to supplier instructions and workplace procedures
- 2.3 Test installed item against expected performance, and troubleshoot performance problems in line with own level of responsibility
3. Finalise installation
- 3.1 Check that completed work complies with quality and work order requirements, and rectify identified deficiencies
- 3.2 Clean work area and surfaces, and dispose of waste safely and sustainably according to workplace procedures
- 3.3 Check, clean and store tools and equipment, and tag and report faulty items according to workplace procedures
- 3.4 Identify and store surplus unused items for re-use and/or recycling according to workplace procedures
- 3.5 Complete required workplace documentation according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBP13 | MSFFDT3001 | Install low-voltage technology, automation, and intelligent management systems in furnishing | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BTV2 | MSF30926 | Certificate III in Shading and Security Screens | Qualification |