Pathway Outline
Date retreived
22/07/2026 9:23 AM AWST
22/07/2026 9:23 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Wall and Ceiling Lining Pre-Apprenticeship
Wall and Ceiling Lining Pre-Apprenticeship
Pathway
National Code
—
—
State Code
WC13
WC13
DTWD Status
Replaced
Replaced
Accreditation, State Implementation and Classification
Approved Date
18/11/2011
18/11/2011
Field of Education
0403 - Building
0403 - Building
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
4 Semesters
Nominal Hours
250
250
Accredited Date
10/11/2011
10/11/2011
Expiry Date
30/09/2017
30/09/2017
Description
The aim of this pre-apprenticeship is to provide learners with industry specific training to gain skills, knowledge and behaviours to enable transition into an indentured apprenticeship.
Packaging Rules
1. Core units
Pre-Apprenticeship Pathway for students who have left school and are studying full-time at a Registered Training Provider. Pre-apprentice students are to undertake Work Placement or Work Experience in accordance with guidelines (business rules) established by the Department of Training and Workforce Development or relevant State Training Authority.
Complete all seven (7) core units listed.
Complete all seven (7) core units listed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W9435 | CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | 32 | Unit of competency |
| D7350 | CPCCCM1015A | Carry out measurements and calculations | 16 | Unit of competency |
| D7349 | CPCCCM1014A | Conduct workplace communication | 16 | Unit of competency |
| D7348 | CPCCCM1013A | Plan and organise work | 16 | Unit of competency |
| W9370 | CPCCCM2001A | Read and interpret plans and specifications | 32 | Unit of competency |
| D7347 | CPCCCM1012A | Work effectively and sustainably in the construction industry | 16 | Unit of competency |
| W9434 | CPCCOHS1001A | Work safely in the construction industry | 4 | Unit of competency |
2. Wall and Ceiling Lining Trade Elective Group
Six (6) trade elective units to be chosen.
Note: The elective units listed are a suggested model program. Additional units may be selected from the CPC31211 Certificate III in Wall and
Ceiling Lining as endorsed in the CPC08 Construction, Plumbing and Services Training Package.
Note: The elective units listed are a suggested model program. Additional units may be selected from the CPC31211 Certificate III in Wall and
Ceiling Lining as endorsed in the CPC08 Construction, Plumbing and Services Training Package.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WE984 | CPCCCM2006B | Apply basic levelling procedures | 16 | Unit of competency |
| W9452 | CPCCPB3012A | Cut and fix paper-faced cornices | 15 | Unit of competency |
| WE986 | CPCCCM2008B | Erect and dismantle restricted height scaffolding | 16 | Unit of competency |
| W9449 | CPCCPB3009A | Finish plasterboard joins manually | 15 | Unit of competency |
| W9442 | CPCCPB3002A | Fix standard plasterboard ceiling sheets | 40 | Unit of competency |
| W9441 | CPCCPB3001A | Fix standard plasterboard wall sheets | 40 | Unit of competency |
| W9450 | CPCCPB3010A | Manually sand plaster work | 10 | Unit of competency |
| W9448 | CPCCPB3008A | Mix plastering compounds | 10 | Unit of competency |
| WE987 | CPCCCM2010B | Work safely at heights | 16 | Unit of competency |
3. Workplacement Coordination Modules
The following form part of the pre-apprenticeship program.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WP096 | WP096 | Pre-apprenticeship Work Placement Coordination 1 (placement arranged) | 0 | Module |
| WP097 | WP097 | Pre-apprenticeship Work Placement Coordination 2 (commenced) | 0 | Module |
| WP098 | WP098 | Pre-apprenticeship Work Placement Coordination 3 (mid-point) | 0 | Module |
| WP099 | WP099 | Pre-apprenticeship Work Placement Coordination 4 (completed) | 0 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 1435 | 52531WA | Certificate II in Wall and Ceiling Lining (Pre-Apprenticeship) | Accredited course |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AA34 | Wall and Ceiling Lining Pre-Apprenticeship | Pathway |
Note
This record WC13 is a Pre-apprenticeship Pathway, users requiring the VET in Schools Pathway, please refer to (52443WA) State ID/TAFE ID 1599.
1. The WA Pre-apprenticeship Program Business Rules provide for details on the requirements of the program. The business rules also outlines the amount of workplace experience a student is to undertake and RTO responsibilities in relation to pre-apprenticeship work placement.
2. The set of work placement coordination modules should be used to indicate that the RTO has undertaken and completed its responsibilities for establishing and monitoring work placements for each pre-apprentice student.
3. RTOs should report students in each module as each phase of the work placement is achieved.
4. The student does not incur course fees for the work placement modules as the nominal hours value for each of these modules is zero.
5. The Department of Training and Workforce Development will use the work placement coordination units reported for each pre-apprentice to monitor, and trigger funding for, RTO efforts in establishing and monitoring work placements.
6. The work placement coordination modules do not represent the amount of workplace experience a student must undertake.
7. The work placement coordination modules are non-assessable and do not specify skill and knowledge requirements.
8. Work placement coordination modules should only be reported as outcome “Non-assessable - satisfactorily completed” (NA for State Training Providers; 4 for private training providers).
9. The work placement coordination modules are to be used for the WA Pre-apprenticeship Program and not to be used for any other purpose.
Please refer to the WA Pre-apprenticeship Program Business Rules 2015 for details on the requirements of the program.
1. The WA Pre-apprenticeship Program Business Rules provide for details on the requirements of the program. The business rules also outlines the amount of workplace experience a student is to undertake and RTO responsibilities in relation to pre-apprenticeship work placement.
2. The set of work placement coordination modules should be used to indicate that the RTO has undertaken and completed its responsibilities for establishing and monitoring work placements for each pre-apprentice student.
3. RTOs should report students in each module as each phase of the work placement is achieved.
4. The student does not incur course fees for the work placement modules as the nominal hours value for each of these modules is zero.
5. The Department of Training and Workforce Development will use the work placement coordination units reported for each pre-apprentice to monitor, and trigger funding for, RTO efforts in establishing and monitoring work placements.
6. The work placement coordination modules do not represent the amount of workplace experience a student must undertake.
7. The work placement coordination modules are non-assessable and do not specify skill and knowledge requirements.
8. Work placement coordination modules should only be reported as outcome “Non-assessable - satisfactorily completed” (NA for State Training Providers; 4 for private training providers).
9. The work placement coordination modules are to be used for the WA Pre-apprenticeship Program and not to be used for any other purpose.
Please refer to the WA Pre-apprenticeship Program Business Rules 2015 for details on the requirements of the program.
No information