Pathway Outline
Date retreived
22/07/2026 9:18 PM AWST
22/07/2026 9:18 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Maintenance
Maintenance
Pathway
National Code
—
—
State Code
WT47
WT47
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
15/09/2013
15/09/2013
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
0307 - Mechanical And Industrial Engineering And Technology
Approved Date
26/10/2006
26/10/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
3 Semesters
Current Release Version
4.00
4.00
Current Release Date
15/09/2013
15/09/2013
Nominal Hours
1184
1184
Description
This is a training program that leads to the completion of the Metals and Engineering Training Package MEM05 qualification MEM40105.
This qualification is designed to reflect the role of team leaders and supervisors in the industry sector. The focus is on the Maintenance specialisation within the mechanical post trade.
This qualification is designed to reflect the role of team leaders and supervisors in the industry sector. The focus is on the Maintenance specialisation within the mechanical post trade.
Packaging Rules
1. Core Units
Complete ALL the core units of competency listed below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5502 | MEM13014A | Apply principles of occupational health and safety in the work environment | 4 | Unit of competency |
| W5531 | MEM15024A | Apply quality procedures | 4 | Unit of competency |
| W5532 | MEM15002A | Apply quality systems | 16 | Unit of competency |
| W5552 | MEM17003A | Assist in the provision of on the job training | 18 | Unit of competency |
| W5452 | MEM16008A | Interact with computing technology | 18 | Unit of competency |
| W5451 | MEM16006A | Organise and communicate information | 18 | Unit of competency |
| D3655 | MSAENV272B | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| W5449 | MEM12024A | Perform computations | 27 | Unit of competency |
| W5492 | MEM12023A | Perform engineering measurements | 48 | Unit of competency |
| W5513 | MEM14005A | Plan a complete activity | 32 | Unit of competency |
| W5512 | MEM14004A | Plan to undertake a routine task | 4 | Unit of competency |
| W5548 | MEM16007A | Work with others in a manufacturing, engineering or related environment | 4 | Unit of competency |
2. Group A Specialisation Units
Select units from this list to a value of at least 12 points and up to a maximum of 109 points
3. Group B Elective Units
Select units from this group to bring the total value of Group A and B units to 109 points, including any prerequisites.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5348 | MEM06003C | Carry out heat treatment | 54 | Unit of competency |
| W5418 | MEM09002B | Interpret technical drawing | 36 | Unit of competency |
| W5703 | MEM24005B | Perform basic eddy current testing | 18 | Unit of competency |
| W5333 | MEM05007C | Perform manual heating and thermal cutting | 18 | Unit of competency |
| W5696 | MEM24010B | Perform radiographic testing | 54 | Unit of competency |
| W5705 | MEM24007B | Perform ultrasonic thickness testing | 18 | Unit of competency |
| W5446 | MEM30007A | Select common engineering materials | 40 | Unit of competency |
| W5488 | MEM12001B | Use comparison and basic measuring devices | 18 | Unit of competency |
| W5574 | MEM18002B | Use power tools/hand held operations | 18 | Unit of competency |
| W5501 | MEM13013B | Work safely with ionizing radiation | 36 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AD32 | Maintenance | Pathway |
Note
This training program is a representation of the qualification code MEM40105 taken from the Metals and Engineering Training Package MEM05 which should be consulted for full description of requirements. MEM05 is endorsed until 31/01/2009
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN on 13/05/08
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN on 13/05/08
Entry Requirements
Not Applicable
