Qualification Outline

Date retreived
22/07/2026 5:38 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Electrical Machine Repair

Certificate III in Electrical Machine Repair

Qualification
National Code:
UEE30620
State Code:
BFP8
TGA Status:
Replaced
DTWD Status:
Transition (Replaced)
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
05/10/2020
Approved Date
12/04/2022
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
A
Nominal Hours
954
Duration
2 Semesters
Current Release Number
3.00
Current Release Date
20/12/2022
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
3.00 20/12/2022 Current Approved
2.00 23/03/2022 Replaced Approved
1.00 05/10/2020 Replaced Approved
Description

This qualification provides competencies to overhaul and repair motor, transformer and control gear including rewinding.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Schedule
Packaging Rules
A total of 1060 weighting points comprising:
- 880 core weighting points listed below; plus
- 180 general elective weighting points from the general elective units listed below.

Choose a totalof 180 weighting points elective units from the list below, of which between 0 and 60 weighting points can be taken from Group A; and between 120 and 180 weighting points can be taken from Group B (or all 180 elective weighting points can be taken from Group B).

Up to 60 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC).

There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol * on training.gov.au. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume.

Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.
1. Core Units

All core units must be completed.

State Code National Code Title Hours Type
OBY70 UEERE0001 Apply environmentally and sustainable procedures in the energy sector 18 Unit of competency
OCA55 UEECD0007 Apply work health and safety regulations, codes and practices in the workplace 18 Unit of competency
OCB69 UEEEL0004 Carry out basic repairs to electrical components and equipment 36 Unit of competency
OCB53 UEEEL0033 Conduct electrical tests on LV electrical machines 36 Unit of competency
OCC58 UEERL0004 Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring 54 Unit of competency
OCC08 UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work 18 Unit of competency
OBX42 UEECD0019 Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
OBY81 UEECD0020 Fix and secure electrotechnology equipment 18 Unit of competency
OCC16 UEECO0022 Participate in electrical machine repair work and competency development activities 54 Unit of competency
OBZ62 UEEEL0056 Place and connect electrical coils 36 Unit of competency
OCB63 UEEEL0017 Repair and maintain mechanical components of electrical machines 36 Unit of competency
OCB39 UEEEL0068 Rewind three phase low voltage induction machines 54 Unit of competency
OCB62 UEEEL0019 Solve problems in direct current (d.c.) machines 27 Unit of competency
OCA64 UEECD0043 Solve problems in direct current circuits 72 Unit of competency
OBZ81 UEEEL0020 Solve problems in low voltage a.c. circuits 72 Unit of competency
OBZ72 UEEEL0021 Solve problems in magnetic and electromagnetic devices 27 Unit of competency
OBZ08 UEEEL0023 Terminate cables, cords and accessories for low voltage circuits 36 Unit of competency
OCB60 UEEEL0024 Test and connect alternating current (a.c.) rotating machines 45 Unit of competency
OCB06 UEEEL0025 Test and connect transformers 27 Unit of competency
OCC28 UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
OCA57 UEEEL0074 Wind electrical coils 36 Unit of competency
2. Group A: Imported and Common Elective Units

Between 0 and 60 weighting points may be taken from Group A.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
OBX53 UEECD0011 Comply with scheduled and preventative maintenance program processes 18 Unit of competency
OCD34 BSBOPS203 Deliver a service to customers 40 Unit of competency
OBY02 UEECO0002 Maintain documentation 18 Unit of competency
OBU39 ICTICT214 Operate application software packages 60 Unit of competency
ODX74 CPCWHS1001 Prepare to work safely in the construction industry 6 Unit of competency
OCA56 UEECD0035 Provide basic instruction in the use of electrotechnology apparatus 18 Unit of competency
OCD26 HLTAID009 Provide cardiopulmonary resuscitation 4 Unit of competency
OCD30 HLTAID011 Provide First Aid 18 Unit of competency
OBY92 UEECO0015 Provide quotations for installation or service jobs 18 Unit of competency
OBY79 UEECO0017 Source and purchase material/parts for installation or service jobs 18 Unit of competency
3. Group B: Qualification Elective Units

Between 120 and 180 weighting points must be taken from Group B; or all 180 weighting points can be taken from Group B.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
OCA00 UEERL0001 Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply 18 Unit of competency
OCC33 UEERL0002 Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c. 18 Unit of competency
OBX64 UEEEL0034 Conduct mechanical tests on electrical machines and components 36 Unit of competency
OBZ15 UEEIC0013 Develop, enter and verify discrete control programs for programmable controllers 54 Unit of competency
OCA33 UEERL0005 Locate and rectify faults in low voltage (LV) electrical equipment using set procedures 18 Unit of competency
OBY62 UEEEL0055 Overhaul and repair major switchgear and control gear 54 Unit of competency
OCB43 UEEEL0066 Rewind LV direct current machines 54 Unit of competency
OBZ55 UEEEL0067 Rewind single phase machines 36 Unit of competency
OBZ64 UEERA0091 Service small electrical appliances and power tools 54 Unit of competency
OBZ69 UEECS0033 Use engineering applications software on personal computers 36 Unit of competency
Replaces
State Code National Code Title Type
A120 UEE30611 Certificate III in Electrical Machine Repair Qualification
Replaced By
State Code National Code Title Type
BOB0 UEE30625 Certificate III in Electrical Machine Repair Qualification
No information
Entry Requirements

There are no entry requirements for this qualification.

Traineeships and Apprenticeships
(AP02060) ELECTRICAL MACHINE REPAIR TRADESPERSON Apprenticeship

Part-time is defined as a minimum of 20 hours per week.