Unit of competency Outline

Date retreived
22/07/2026 11:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rewind single phase machines

Rewind single phase machines

Unit of competency
National Code
UEEEL0067
State Code
OBZ55
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
29/11/2024
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to dismantle and wind stators for single phase machines.It includes planning to and rewinding single phase machines by working safely, using tools, measuring and winding data. It also includes following technical instructions/specifications, workplace procedures and recording workplace activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to rewind single phase machines
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied
  • 1.2 Existing WHS/OHS risk control measures for work preparation are followed
  • 1.3 Work instructions are identified, obtained and applied
  • 1.4 Advice is sought from work supervisor to ensure the work is coordinated effectively with others
  • 1.5 Winding data is obtained from records or work supervisor in accordance with workplace procedures
  • 1.6 Materials required for work are obtained in accordance with technical specifications and workplace procedures
  • 1.7 Tools, equipment and testing devices needed to carry out work are obtained and checked for correct operation and safety
2 Rewind single phase machines
  • 2.1 Existing WHS/OHS risk control work measures are followed
  • 2.2 Machines/equipment are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Single phase machine is dismantled and parts tagged and stored to prevent loss or damage in accordance with workplace procedures and instructions
  • 2.4 Winding is stripped from stator in accordance with workplace procedure and instructions
  • 2.5 Stator is wound and insulated in accordance with winding data and workplace procedures
  • 2.6 Machine is assembled and prepared for inspection and testing in accordance with workplace procedures
  • 2.7 Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • 2.8 Routine quality checks are conducted to ensure electrical coils are correctly wound with correct wire, number of turns and shape in accordance with work instructions and technical specifications
  • 2.9 Rewind stators work is completed within timeframe, environment and workplace conditions
3 Complete workplace report
  • 3.1 WHS/OHS workplace completion risk control measures are followed
  • 3.2 Workplace report, forms/data sheets are completed accurately in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC496 UEENEEG152A Rewind single phase machines Unit of competency