Qualification Outline
22/07/2026 2:56 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Applied Fashion Design and Technology
Certificate II in Applied Fashion Design and Technology
LMT21707
W367
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 16/07/2011 | Current | Approved |
Description
Job roles/employment outcomes
This qualification aims to give students an introductory overview of fashion design. It also includes a series of units targeted at the unique fashion and textile designs used in indigenous Australian culture.
Application
The qualification is designed for application in a highly supervised context such as VET in schools, or other equivalent introduction to fashion industry environments.
If a greater focus on sewing and other technical skills is required then Certificate II in Clothing Production (Intermediate) should be considered.
Pathways into the qualification
Direct entry into this requires completion of a total of eleven (11) units according to the rules described below.
Units that have been achieved through completion of the LMT11107 Certificate I in Textiles Clothing and Footwear may be credited towards the Certificate II when they are also included in the unit lists for this qualification.
This qualification includes units LMTFD2002B, LMTFD2003B and LMTFD2004B which, when selected, must be applied in an indigenous Australian context.
Pathways from the qualification
Further training pathways from this qualification include LMT301407 Certificate III in Applied Fashion Design and Technology.
Licensing considerations
There are no specific licences that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements in some environments. Local regulations should be checked for details.
Schedule
Packaging Rules
must be achieved in eleven (11) units of competency.- Seven (7) core units of competency
- Four (4) elective units of competency as specified below.
Select four (4) elective units as specified below.
- A minimum of two (2) units must be selected from Group A
- A maximum of two (2) units may be selected from Group B:
- Other Applied Fashion Design and Technology units that are available at Certificates II
(maximum 2 units) and III (maximum 1 unit)
- Other TCF Training Package units that are available at Certificates II (maximum 2 units) and III (maximum 1 unit)
- Units from other endorsed Training Packages and accredited courses that are available at Certificates I (maximum 1 unit), II (maximum 2 units) and III (maximum 1 unit)
- The remainder must be selected from Group A.
Note: Where prerequisite units apply, these have been noted, and must be considered in the
total number of units.
1. Core Units
All seven (7) core units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7304 | LMTGN2002B | Apply quality standards | 30 | Unit of competency |
| W7211 | LMTFD2001B | Design and produce a simple garment | 60 | Unit of competency |
| W7303 | LMTGN2001B | Follow defined OHS policies and procedures | 20 | Unit of competency |
| W7215 | LMTFD2005B | Identify design process for fashion designs | 30 | Unit of competency |
| W7151 | LMTCL2003B | Identify fibres and fabrics | 40 | Unit of competency |
| D3655 | MSAENV272B | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| W7149 | LMTCL2001B | Use a sewing machine | 30 | Unit of competency |
2. Group A Elective Units
A minimum of two (2) units must be selected from Group A.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W7213 | LMTFD2003B | Apply dyeing techniques to produce indigenous textile designs | 80 | Unit of competency |
| W7212 | LMTFD2002B | Apply printing techniques to produce indigenous textile designs | 80 | Unit of competency |
| W7159 | LMTCL2011B | Draw and interpret a basic sketch | 25 | Unit of competency |
| W7158 | LMTCL2010B | Modify patterns to create basic styles | 50 | Unit of competency |
| W7311 | LMTGN2009B | Operate computing technology in a textiles, clothing and footwear workplace | 20 | Unit of competency |
| W7152 | LMTCL2004B | Sew components | 50 | Unit of competency |
| W7305 | LMTGN2003B | Work in the Textiles, Clothing and Footwear industry | 40 | Unit of competency |
| W7214 | LMTFD2004B | Work within an indigenous cultural framework | 40 | Unit of competency |
3. Group B Elective Units
A maximum of two (2) units may be selected from Group B:
- other Applied Fashion Design and Technology units that are available at Certificates II
(maximum 2 units) and III (maximum 1 unit)
- other TCF Training Package units that are available at Certificates II (maximum 2 units) and III (maximum 1 unit)
- units from other endorsed Training Packages and accredited courses that are available at Certificates I (maximum 1 unit), II (maximum 2 units) and III (maximum 1 unit)
Please refer to the Training Package for the full details of available units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W285 | LMT21706 | Certificate II in Applied Fashion Design and Technology | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BDH5 | MST20616 | Certificate II in Applied Fashion Design and Technology | Qualification |
No information
Entry Requirements
Not applicable.
Traineeships and Apprenticeships