Qualification Outline
22/07/2026 4:32 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate IV in ESI Generation Maintenance (Fabrication)
Certificate IV in ESI Generation Maintenance (Fabrication)
UEP40422
BHQ8
Current
Approved
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 2.00 | 13/12/2022 | Current | Approved |
| 1.00 | 20/04/2022 | Replaced | Approved |
Description
This qualification covers the skills and knowledge required to complete power generation work functions in the electrical supply industry. Functions include installation, fabrication, repair and maintenance of industrial pressure vessels and associated pipework, coded welding, welding supervision, general fabrication and the observation of safe working practices. It also includes the supervision of others and the coordination of work activities.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Schedule
Packaging Rules
A total 1280 weighting points comprising:- 760 core weighting points; plus
- 520 elective weighting points from the general elective units listed below.
Choose a total of 520 weighting point from the general elective units list below of which:
- between 0 and 220 weighting points can be taken from Group A
- between 0 and 400 weighting points can be selected from Group B
- between 120 and 520 weighting points may be taken from Group C, you may select all your elective units from this group.
Up to 220 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided that selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in UEP Electricity Supply Industry - Generation Sector Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points unless directed from the ESI Generation Industry Reference Committee (IRC). The general elective units must contribute to the vocational outcomes of the qualification.
Where imported units are selected, care must be taken to ensure that all prerequisite units specified are complied with.
Where a prerequisite unit is attached to a unit, it is identified on training.gov.au (TGA).
1. Core Units
All core units must be completed.
2. Group A Elective Units
Between 0 and 220 weighting points can be chosen from Group A. Please refer to the packaging rules for the full details of available options.
3. Group B Elective Units
A total of 410 weighting points can be chosen from Group B. Please refer to the packaging rules for the full details of available options.
4. Group C Elective Units
Between 120 and 520 weighting points may be chosen from Group C. Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| ODZ17 | UEPOPS011 | Conduct multiple energy source isolation procedures for permit to work | 36 | Unit of competency |
| S5131 | UEPMNT422 | Conduct performance testing on process plant and equipment | Unit of competency | |
| OAH76 | UEPMNT421 | Conduct technical inspection of process plant and equipment | Unit of competency | |
| OAW92 | MEM05020 | Perform advanced welding using gas tungsten arc welding process | 36 | Unit of competency |
| OAW91 | MEM05022 | Perform advanced welding using oxy acetylene welding process | 54 | Unit of competency |
| OAW77 | MEM05045 | Perform pipe welds to code standards using manual metal arc welding process | 54 | Unit of competency |
| OAW78 | MEM05043 | Perform welds to code standards using gas metal arc welding process | 54 | Unit of competency |
| OAW76 | MEM05044 | Perform welds to code standards using gas tungsten arc welding process | 54 | Unit of competency |
| OAW75 | MEM05046 | Perform welds to code standards using manual metal arc welding process | 54 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| BEC1 | UEP40418 | Certificate IV in ESI Generation Maintenance (Fabrication) | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships