Qualification Outline

Date retreived
22/07/2026 5:39 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Security Assembly and Set-up

Certificate II in Security Assembly and Set-up

Qualification
National Code:
UEE21611
State Code:
A111
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
17/04/2014
Approved Date
05/07/2012
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
324
Duration
1 Semester
Current Release Number
2.00
Current Release Date
17/04/2014
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
2.00 17/04/2014 Current Approved
Description

Scope
This qualification provides competencies to select, assemble and set-up of wired and wireless base level security systems following prescribe routines.

Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- Seven (7) core units and
- A combination of elective units to achieve a total weighting of 160 points:
- A maximum of sixty (60) weighting points may be chosen from Group A Impoted and Common Elective Units
- A minimum of sixty (60) to a maximum of 120 weighting points may be chosen from Group B Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 2. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
1. Core Units

All seven (7) units must be completed

State Code National Code Title Hours Type
WC711 UEENEEK142A Apply environmentally and sustainable procedures in the energy sector 18 Unit of competency
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
WC576 UEENEEH150A Assemble and set up basic security systems 72 Unit of competency
S7314 UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work 18 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
W7839 UEENEEE038B Participate in development and follow a personal competency development plan 18 Unit of competency
S7311 UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
2. Group A Imported and Common Elective Units

Units may be chosen to a maximum of sixty (60) weighting points from Group A.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
W7738 UEENEEC008B Receive and store materials and equipment for electrotechnology work 18 Unit of competency
W7732 UEENEEC002B Source and purchase material/parts for installation or service jobs 18 Unit of competency
3. Group B Elective Units

A minimum of sixty (60) to a maximum of 120 weighting points to be chosen from Group B.
Please refer to the Training Package for the full list of unit weighting points.

State Code National Code Title Hours Type
WC374 UEENEEA101A Assemble electronic components 36 Unit of competency
WC632 UEENEEI116A Assemble, enter and verify operating instructions in microprocessor equipped devices 18 Unit of competency
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
WC457 UEENEEF101A Install and connect cabling for direct access to telecommunications service 18 Unit of competency
WC420 UEENEEE108A Lay wiring/cabling and terminate accessories for extra-low voltage (ELV) circuits 36 Unit of competency
WC375 UEENEEA102A Select electronic components for assembly 18 Unit of competency
S7309 UEENEEE104A Solve problems in d.c. circuits 72 Unit of competency
WC385 UEENEED101A Use computer applications relevant to a workplace 18 Unit of competency
Replaces
State Code National Code Title Type
W825 UEE21610 Certificate II in Security Assembly and Setup Qualification
Replaced By
State Code National Code Title Type
BFJ3 UEE21620 Certificate II in Security Assembly and Set-up Qualification
No information
Entry Requirements

Not applicable.

Traineeships and Apprenticeships
(TR08980) SECURITY ASSEMBLY AND SETUP (LEVEL 2) Traineeship

Part-time is defined as a minimum of 20 hours per week.