Unit of competency Outline

Date retreived
23/07/2026 10:32 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select, transfer and remove materials and products

Select, transfer and remove materials and products

Unit of competency
National Code
MSTGN2007
State Code
BAW01
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
01/12/2016
Nominal Hours
40
Description
This unit of competency covers skills and knowledge required to select, transfer and remove materials and products in support of the production processes.Work requires discretion, initiative and judgement. Work may be conducted in a variety of environments, such as operational workplace activities, restricted space, hazardous, controlled or exposed conditions.This unit of competency is applicable to all sectors of the textiles, clothing and footwear (TCF) industry.Work may be conducted in small to large scale enterprises and may involve individual and team activities.This unit does not cover the use of a forklift. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Determine requirements
  • 2.1 Review work requests and confirm requirements
  • 2.2 Organise, confirm and record tasks according to specified procedures
  • 2.3 Select, check and correctly use relevant personal and other safety equipment, where needed
  • 2.4 Identify and organise appropriate equipment for transferring materials
3 Select materials and products
  • 3.1 Interpret documentation and identify codes and references indicating source, customer, storage location or batch, where relevant
  • 3.2 Identify and select materials or products to be loaded or unloaded
  • 3.3 Document and report non-conforming materials and products
  • 3.4 Update transfer and store documentation
4 Load, unload and transfer materials or products
  • 4.1 Use suitable equipment (other than forklift) to load and unload materials according to materials handling requirements, safe work practices and correct manual handling techniques
  • 4.2 Transfer materials to correct destination
  • 4.3 Apply environmental requirements and procedures concerned with waste, pollution and recycling of materials at all stages of the process
  • 4.4 Maintain and clean materials, equipment and work environment
  • 4.5 Complete relevant documentation associated with tasks
No information
No information
Replaces
State Code National Code Title Type
W7309 LMTGN2007B Select, transfer and remove materials and products Unit of competency
Replaced By
State Code National Code Title Type
OBL78 MSTGN2021 Select, transfer and remove materials and products Unit of competency