Unit of competency Outline

Date retreived
23/07/2026 8:57 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply cost factors to work practices

Apply cost factors to work practices

Unit of competency
National Code
MSACMT230A
State Code
W8987
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/12/2005
State Implementation and Classification
Approved Date
09/09/2014
Field of Education
080315 - Project Management
Original Release Date
09/09/2014
Nominal Hours
35
Description
This unit covers the knowledge and skills needed for an individual to identify cost components and to be able to determine in general terms the cost impacts of alternative actions.
Notes
Elements and Performance Criteria
1. Identify in own work area major cost components of product or process
  • 1.1. Identify cost components in the product or process in own work area 1.2. Recognise the impact of current or alternative actions on costs
2. Identify constraints to cost efficiency
  • 2.1. Identify required production/process rate and major costs2.2. Identify costs factors under the control of the individual or team2.3. Relate identified costs factors to impact on overall cost of production/process 2.4. Identify cost factors that are a constraint to cost efficiency in own work area
3. Apply cost efficient work practices
  • 3.1. Express the implications of possible actions/changes to improve cost efficiency in simple financial terms3.2. Identify non-financial implications of proposed changes in discussion with relevant people3.3. Select actions which minimise overall costs3.4. Monitor actions to ensure cost efficiency in own work area is maintained

Cost components include fixed and variable costs such as power/energy, materials, plant and equipment, production or process time including impact on salary and wages, office expenses such as telephone and government taxes and charges.


Process may include a production, maintenance, logistics or office process in a manufacturing environment.


Overall cost may include the assessment of negative and positive financial implications. It also includes negative long term issues, such as Occupational Health and Safety (OHS), environmental and regulatory issues.

Overview of assessment requirements
The person will as part of their routine decision making aim to minimise costs. There should be evidence of their doing so.

What are the specific resource requirements for this unit?
Access to a workplace implementing competitive manufacturing strategies. No other specific resources are required.

What critical aspects of evidence are required to demonstrate competency in this unit?
Evidence of being able to identify costs factors relevant to an individual's job.
Evidence of having made appropriate decisions to minimise overall costs.

In what context should assessment occur?
Assessment will need to occur in a workplace or by use of a work based case study.

Are there any other units which could or should be assessed with this unit or which relate directly to this unit?
This unit may be assessed concurrently with appropriate units on continuous improvement.

What method of assessment should apply?
Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria, skills and knowledge. A holistic approach should be taken to the assessment.
Assessors should gather sufficient, fair, valid, reliable, authentic and current evidence from a range of sources. Sources of evidence may include direct observation, reports from supervisors, peers and colleagues, project work, samples, organisation records and questioning. Assessment should not require language, literacy or numeracy skills beyond those required for the unit.
The assessee will have access to all techniques, procedures, information, resources and aids which would normally be available in the workplace.
The method of assessment should be discussed and agreed with the assessee prior to the commencement of the assessment.

What evidence is required for demonstration of consistent performance?
Evidence should be available over a period of time or from more than one process or product.

Replaces
State Code National Code Title Type
W2572 MCMT230A Apply cost factors to work practices Unit of competency
Replaced By
State Code National Code Title Type
WD501 MSS402030A Apply cost factors to work practices Unit of competency
State Code National Code Title Type
W642 LMF40508 Certificate IV in Furniture Design and Technology Qualification
1478 52263 Certificate II in Glass Glazing (Aluminium Windows and Frames) Accredited course
J188 ICP30912 Certificate III in Printing and Graphic Arts (Cartons and Corrugating) Qualification
W768 ICP20810 Certificate II in Printing and Graphic Arts (Cartons) Qualification
W766 ICP20610 Certificate II in Printing and Graphic Arts (Converting, Binding and Finishing) Qualification
W769 ICP20910 Certificate II in Printing and Graphic Arts (Corrugating) Qualification
W762 ICP20210 Certificate II in Printing and Graphic Arts (Desktop Publishing) Qualification
J183 ICP30412 Certificate III in Printing and Graphic Arts (Digital Printing) Qualification
W763 ICP20310 Certificate II in Printing and Graphic Arts (Digital Printing) Qualification
J180 ICP30112 Certificate III in Printing and Graphic Arts (Graphic Design Production) Qualification
J181 ICP30212 Certificate III in Printing and Graphic Arts (Graphic Pre-press) Qualification
J190 ICP31112 Certificate III in Printing and Graphic Arts (Ink Manufacture) Qualification
W771 ICP21110 Certificate II in Printing and Graphic Arts (Ink Manufacture) Qualification
J189 ICP31012 Certificate III in Printing and Graphic Arts (Mail House) Qualification
W770 ICP21010 Certificate II in Printing and Graphic Arts (Mail House) Qualification
J182 ICP30312 Certificate III in Printing and Graphic Arts (Multimedia) Qualification
J186 ICP30712 Certificate III in Printing and Graphic Arts (Print Finishing) Qualification
W764 ICP20410 Certificate II in Printing and Graphic Arts (Print Production Support) Qualification
J184 ICP30512 Certificate III in Printing and Graphic Arts (Printing) Qualification
W767 ICP20710 Certificate II in Printing and Graphic Arts (Sacks and Bags) Qualification
J187 ICP30812 Certificate III in Printing and Graphic Arts (Sacks and Bags) Qualification
J185 ICP30612 Certificate III in Printing and Graphic Arts (Screen Printing) Qualification
W765 ICP20510 Certificate II in Printing and Graphic Arts (Screen Printing) Qualification
W516 PMA30108 Certificate III in Process Plant Operations Qualification
D552 MSS50111 Diploma of Sustainable Operations Qualification